FSPSP12

The DIMM FRU that was previously replaced did not correct the memory error.

1. Power off the system. See Powering on and powering off the system .
2. To determine the action to perform, use the following table:

   System	Action
   8203-E4A, 9407-M15, and 9408-M25	Replace the system backplane (Un-P1). SeeSystem FRU locations for information on system FRU locations.
   8204-E8A and 9409-M50	Replace the processor card that the DIMM is plugged into (Un-P1-C13 for processor card 1 through Un-P1-C16 for processor card 4). SeeSystem FRU locations for information on system FRU locations.
   8234-EMA, 9117-MMA, 9406-MMA , and 9125-F2A	Replace the board DIMM is plugged into. SeeSystem FRU locations for information on system FRU locations.
   9119-FHA	Replace the processor book with the failure.

3. Perform a slow boot. See Performing a slow boot .