FSPSP29

The system has detected that all I/O bridges are missing from the system configuration.

Select the system that you are servicing and then perform the indicated FSPSP29 procedure.

8203-E4A, 9407-M15, and 9408-M25
8204-E8A and 9409-M50
8234-EMA, 9117-MMA, and 9406-MMA
9125-F2A
9119-FHA

8203-E4A, 9407-M15, 9408-M25, 8204-E8A and 9409-M50
  1. Power off the system. To review the "Powering on and powering off" procedure go Powering on and powering off the system .
  2. Replace the system backplane (Un-P1). Refer to System FRU locations and locate the correct location of the part needing servicing on your system.
  3. Perform a slow boot. To review the "Performing a slow boot" procedure go to Performing a slow boot This ends the procedure.

8234-EMA, 9117-MMA, and 9406-MMA

  1. Power off the system. To review the "Powering on and powering off" procedure go Powering on and powering off the system .
  2. Replace the Service Processor (Un-P1-C11).
  3. Perform a slow boot. To review the "Performing a slow boot" procedure go to Performing a slow boot
  4. Does the problem persist?
    No:
    Go to Verify a repair . This ends the procedure.
    Yes:
    Continue with the next step.
  5. Replace the system backplane (Un-P1).
  6. Perform a slow boot. To review the "Performing a slow boot" procedure go to Performing a slow boot
  7. Does the problem persist?
    No:
    Go to Verify a repair This ends the procedure.
    Yes:
    Continue with the next step.
  8. Replace each Secondary Unit System Backplane (Un-P1), one at a time, until the problem is resolved. This ends the procedure.
(9125-F2A) perform the following:
  1. Power off the system. To review the "Powering on and powering off" procedure go Powering on and powering off the system .
  2. Replace the I/O backplane (Un-P1).
  3. Perform a slow boot. To review the "Performing a slow boot" procedure go to Performing a slow boot

9119-FHA

FSPSP29 is not applicable to the 9119-FHA.

This ends the procedure.