FSPSP47

The system has detected an error within the PSI link. To resolve the problem, perform the following:

Refer to System FRU locations for instructions for removing and replacing any FRUs called out by the following procedure.
Select the system group that you are servicing:

8203-E4A, 9407-M15, and 9408-M25

Perform the following:

  1. Replace the system backplane (Un-P1)
  2. Perform a slow boot. See Performing a slow boot . This ends the procedure.

8204–E8A and 9409-M50

Perform the following:

  1. Replace the processor cards one at a time (Un-P1-C13 or Un-P1-C14 or Un-P1-C15 or Un-P1-C16). SeeSystem FRU locations for instructions for removing and replacing any FRUs.
  2. Perform a slow boot. Refer to Performing a slow boot .
  3. Does the problem persist?
    No:
    This ends the procedure
    Yes:
    Continue with the next step.
  4. Have all processor cards been replaced?
    No:
    Go back to step 1 and replace a different processor card.
    Yes:
    Continue with the next step.
  5. Replace the system backplane (Un-P1)
  6. Perform a slow boot. See Performing a slow boot . This ends the procedure.

9117-MMA and 9406–MMA

Perform the following:

  1. Replace the service processor.
  2. Perform a slow boot. See Performing a slow boot .
  3. Does the problem persist?
    No:
    This ends the procedure.
    Yes:
    Continue with the next step.
  4. Replace the processor cards one at a time.
  5. Perform a slow boot. See Performing a slow boot .
  6. Does the problem persist?
    No:
    This ends the procedure.
    Yes:
    Continue with the next step.
  7. Replace the system backplane.
  8. Perform a slow boot. See Performing a slow boot . This ends the procedure.

9125-F2A

Perform the following:

  1. Replace the I/O Backplane (Un-P1).
  2. Perform a slow boot. See Performing a slow boot .
  3. Does the problem persist?
    No:
    This ends the procedure.
    Yes:
    Continue with the next step.
  4. Replace the Processor Backplane (Un-P2).
  5. Perform a slow boot. See Performing a slow boot . This ends the procedure.