FSPSP27

An attention line has been detected as having a problem. If the FRU replaced before this procedure did not correct the problem, perform the following:

Refer to Locating FRUs for instructions on replacing any FRUs called out by this procedure.

  1. Was the FRU called out before this procedure a Memory DIMM (Un-P1-C14 through Un-P1-C17 or Un-P1-C21 through Un-P1-C24) or a GX Adapter Card (Un-P1-C8 or Un-P1-C6)
  2. Perform the following:
    1. Replace the system backplane (Un-P1).
    2. Perform a slow boot. This ends the procedure.