This window displays the date and time at which the state of the managed system was changed.
- Time
- Displays the date and time at which the state of the managed system was changed.
The date and time displayed here are the local time on the HMC at the time that the state of the managed system was changed. This is not necessarily the same local time that is used on the managed system. This also does not take into account any changes that you made to the HMC local time since the date and time that are displayed here.
- State
- Displays the state of the managed system after the state was changed. Possible values include the following:
Operating: The managed system has initialized and is operational.
Power off: The managed system is powered off.
Initializing: The managed system is powered on and is initializing. The initialization time can vary depending on the hardware and the partition configuration of the managed system.
Pending authentication: The managed system is waiting for the password to be authenticated.
Failed authentication: The service processor password is not synchronized with the Hardware Management Console (HMC) password.
Error: The operating system or the hardware of the managed system is experiencing an error.
Error - Dump in Progress: The operating system or the hardware of the managed system is experiencing an error, and a system dump is in process.
Error - Terminated: The operating system or the hardware of the managed system is experiencing an error, and the attempted action was terminated.
On Demand Recovery: The anchor card (also known as the system VPD card) on this managed system has been replaced. You must enter replacement activation codes for Capacity on Demand (including CoD advanced functions such as Advanced POWER Virtualization Enterprise Edition, Advanced POWER Virtualization Standard Edition, and Enterprise enablement). You will then need to restart your On/Off CoD requests.
Powering Off: The managed system is in the process of powering off.
Standby: The managed system is powered on using the Power on standby option. It will stay in this state until a partition or system profile is activated. You can create and modify partitions and profiles while the managed system is in this state.
Incomplete: The HMC failed to get all of the necessary information from the managed system.
No Connection: The HMC is not connected or the handshake with the managed system failed.
Recovery: The save area in the service processor is not synchronized with the HMC database.