1025 The 2145 system assembly is failing.

Action

1. Go to the light path diagnostic MAP and perform the light path diagnostic procedures.
2. If the light path diagnostic procedure isolates the FRU, mark this error as "fixed" and go to the repair verification MAP. If you have just replaced a FRU but it has not corrected the problem, ensure that the FRU is installed correctly and go to the next step.
3. Replace the frame assembly.
4. Check node status. If all nodes show a status of "online", mark the error that you have just repaired as "fixed". If any nodes do not show a status of "online", go to the start MAP. If you return to this step, contact your support center to resolve the problem with the 2145.
5. Go to the repair verification MAP.

Possible Cause-FRUs or other:

2145-8G4

• The FRUs that are indicated by the Light path diagnostics (98%)
• System board (2%)

2145-8F2 or 2145-8F4

• The FRUs that are indicated by the Light path diagnostics (98%)
• Frame assembly (2%)

2145-4F2

N/A