Explanation
This error was reported because a large number of disk error recovery procedures have
been performed by the disk controller. The problem is probably caused by a
failure of some other component on the SAN.
Action
- View the error log entry and determine the managed disk that was being
accessed when the problem was detected.
- Perform the disk controller problem determination and repair procedures
for the MDisk determined in step 1.
- Perform problem determination and repair procedures for the fibre channel
switches connected to the 2145 and any other fibre-channel network components.
- If any problems are found and resolved in steps 2 and 3, mark this error
as "fixed".
- If no switch or disk controller failures were found in steps 2 and 3,
take an error log dump. Call your hardware support center.
- Go to repair verification MAP.
Possible Cause-FRUs or other:
Other:
- Enclosure/controller fault
- Fibre-channel switch