Explanation
The node has shut down without saving its current state to its internal disk. The node has restarted but it is not able to participate in the cluster.
The usual cause of this error is a user action that has removed power from the node in a manner that does not allow the node to save its state data to its internal disk. Actions that might cause this error include:
- Removing the node power cable from the node or uninterruptible power supply.
- Pressing the power button on the node for more than four seconds. This action causes an immediate power off.
- Powering off the uninterruptible power supply while the node is active or while the node is in the process of shutting down.
A software error or hardware error might also cause the node to power off without saving the state data. If the cause is a hardware error, the hardware problem is intermittent because the node has restarted. In this case, the node message and trace files might indicate the cause of the power off and your support center might request these files for analysis.
Action
- If the node is offline to the cluster, delete the offline node from the cluster and then add the node back into the cluster to reintroduce the node to the cluster.
- Determine whether this error has occurred because power was removed from this node in a manner that does not allow the node to save its state data to its internal disk. If the cause of the error has been determined, continue with MAP 5700: Repair verification.
- If you cannot identify an action or event that has caused a temporary loss of power to the node, ensure that the input power cable is securely connected to both the node and to the uninterruptible power supply.
- If you still cannot determine the cause of the temporary loss of power to the node, call your support center for assistance.
Possible Cause-FRUs or other:
Your support center might indicate a FRU based on their problem analysis (2%)
Other: