SAN Volume Controller 2145-8A4 parts

You might need to replace a SAN Volume Controller 2145-8A4 field replaceable unit (FRU).

Figure 1 shows how the different parts of the SAN Volume Controller 2145-8A4 are assembled.

Figure 1. Exploded view of the SAN Volume Controller 2145-8A4 node
This figure shows the parts of the SAN Volume Controller 2145-8A4 node
  • Table 1 provides the part numbers and a brief description for parts that are exchanged within SAN Volume Controller 2145-8A4 service procedures.
  • Table 2 provides the part numbers and a brief description for parts that are not exchanged within SAN Volume Controller 2145-8A4 service procedures.

Use the assembly index number to locate and identify the parts that are shown in Figure 1.

Table 1. FRUs that are exchanged within SAN Volume Controller 2145-8A4 service procedures
Assembly index Part number Units Description
-2 41Y2854 4 Memory, 2 GB PC2-5300 ECC
-3 43W5112 1 Riser card, PCI Express
-4 31P0937 1 4-port fibre-channel host bus adapter
- 23R2770 4 Fibre-channel SFP connector
-5 43W5103 1 System board (You need 1 alcohol wipe and 1 thermal grease syringe when you replace this FRU. If you do not already have these, order them before you begin to replace the part.)
-6 39M4347 1 Disk cable assembly (A SATA disk drive back plate with 2 SATA cables)
-7 39Y7289 1 Power supply, 351 watt
-8 39M4322 5 Fan (40 mm)
-10 41Y8247 1 Hard disk drive, 3.5 in, simple-swap SATA

This disk drive, when ordered as a replacement, will be a supported compatible drive of at least the same capacity as the one being replaced.

-12 31P1157 1 Service controller, including the front-panel display and the display and control buttons
-13 42C1513 1 Operator-information panel
- 39M6266 1 Operator-information panel cable
-15 44X0204 1 Microprocessor, 3.0 GHz 6 MB dual core (You need 1 alcohol wipe and 1 thermal grease syringe when you replace this FRU. If you do not already have these, order them before you begin to replace the part.)
- 33F8354 1 Battery, 3.0V
- 31P1177 1 Power cable assembly (SAN Volume Controller to the 2145 UPS-1U).
The SAN Volume Controller 2145-8A4 does not work with previous versions of the power cable assembly. The correct power cable assembly is indicated by the red tape that is used to bind the cables together.
- 12R9914 1 External fibre-channel cable, LC­LC, 5.0 m (16.4 ft)
- 12R9915 1 External fibre-channel cable, LC­LC, 25.0 m (82 ft)
- 59P4739 1 Alcohol wipe
- 41Y9292 1 Thermal grease
Table 2. FRUs that are not exchanged within SAN Volume Controller 2145-8A4 service procedures
Assembly index Part number Quantity Description
- 32P9107 1 Support rail kit
- 31P1171 1 Cable retention bracket
- 43W5119 1 Chassis
1 42C1284 1 Top cover
9 42C1286 1 Drive cage
11 43W5115 1 Front bezel
14 39M6296 1 Air baffle
16 43W5117 1 Heat-sink assembly retention module
17 43W5116 1 Heat-sink assembly
- 42C1282 1 3.5 in. SATA service label
- 43W5113 1 Service label
- 43W5114 1 CRU/FRU label
- 39M4351 2 Bracket ear
Library | Support | Terms of use | Feedback
© Copyright IBM Corporation 2003, 2009. All Rights Reserved.