You might need to replace a SAN Volume Controller 2145-8F4 field replaceable unit (FRU).
Figure 1 shows how the different parts of the SAN Volume Controller 2145-8F4 are assembled.
| Assembly index | Part number | Units | Description |
|---|---|---|---|
| 31P0705 | 1 | Frame assembly | |
| - | 31P0769 | 1 | 80GB SATA HDD This disk drive, when ordered as a replacement, will be a supported compatible drive of at least the same capacity as the one being replaced. |
| -1 | 23K4219 | 1 | Top cover |
| -3 | 90P1956 | 1 | Riser card, PCI Express |
| -4 | 39R9058 | 2 | Heat sink |
| -5 | 13M8293 | 2 | Microprocessor, 3.0 GHz |
| -6 | 90P5282 | 1 | Heat sink retention module |
| - | 90P5284 | 1 | Chassis |
| - | 23K4209 | 1 | Cage assembly |
| -7 | 39Y6958 | 1 | System board |
| -8 | 39Y7261 | 2 | Voltage regulator module (VRM), 1U/75A |
| -9 | 39Y7169 | 1 | Power supply, 585 watt |
| - | 40K8157 | 1 | Power backplane |
| - | 33F8354 | 1 | Battery, 3.0V |
| - | 40K8160 | 1 | Cable, fan power |
| - | 40K8159 | 1 | Cable, signal, front panel |
| -10 | 42C9719 | 1 | Operator information panel |
| -11 | 40K8156 | 1 | Fan holder with fan backplanes |
| -13 | 40K8139 | 3 | Fan, 40×40×28 |
| -14 | 40K8140 | 4 | Fan, 40×40×56 |
| - | 73P2870 | 8 | Memory, 1 GB ECC DRR2 |
| Assembly index | Part number | Units | Description |
|---|---|---|---|
| -2 | 31P0714 | 1 | 4-port fibre-channel host bus adapter |
| - | 23R2770 | 1 | Fibre-channel SFP connector |
| -12 | 31P0708 | 1 | Service controller |
| - | 23K4218 | 1 | Kit, toolless rail |
| - | 31P1063 | 1 | Power cable assembly (SAN Volume Controller to the 2145 UPS-1U) |
| - | 31P0715 | 1 | Cable retainer |
| - | 39M5699 | External Fibre Channel cable, LCLC, 1.0 m (3.3 ft) | |
| - | 39M5700 | External Fibre Channel cable, LCLC, 5.0 m (16.4 ft) | |
| - | 39M5701 | External Fibre Channel cable, LCLC, 25.0 m (82 ft) | |
| - | 12R9321 | External Fibre Channel cable, LCSC/LC, 1.0 m (3.3 ft) |