Storage groups can only be configured if Access Logix is
installed and enabled.
Access Logix provides the following LUN mapping:
Notes: - A subset of logical units (LUs) can form a storage group.
- An LU can be in multiple storage groups.
- A host can be added to a storage group. This host has access to
all LUs in the storage group.
- A host cannot be added to a second storage group.
- Right-click on the storage system from the Enterprise Storage
window.
- Select Create Storage Group. The
Create Storage Group window is displayed.
- Enter a name for your storage group in the Storage
Group Name field.
- If available, select Dedicated in
the Sharing State field.
- Click OK. The storage group is created.
- Right-click the storage group in the Enterprise Storage
window.
- Select Properties. The Storage Group
Properties window is displayed.
- Perform the following steps from the Storage Group Properties
window:
- Select the LUNs tab.
- Select the LUNs that you want the SAN Volume Controller to
manage in the Available LUNs table.
Attention: Ensure
that the LUs that you have selected are not used by another storage
group.
- Click the forward arrow button.
- Click Apply. A Confirmation window
is displayed.
- Click Yes to continue. A Success
window is displayed.
- Click OK.
- Select the Hosts tab.
- Select the host that you created when you registered
the SAN Volume Controller ports
with the EMC CLARiiON.
Attention: Ensure that
only SAN Volume Controller hosts
(initiator ports) are in the storage group.
- Click the forward arrow button.
- Click OK. The Confirmation window
is displayed.
- Click Yes to continue. A Success
window is displayed.
- Click OK.