Before
you can use the master console,
you must configure the internal IP network connection.
If you are using
the master console on
an IPv6 network, you must ensure that it is configured to run IPv6.
See the
Microsoft knowledge base for more information on setting up IPv6 on
your operating
system.
Perform the following steps to configure
the Local Area Connection:
- From the desktop, right-click My Network
Places.
- Click Properties.
- Right-click Local Area Connection.
- Click Properties.
- Click Internet Protocol (TCP/IP).
- Click Properties.
- Type all required information for the
IP and
DNS addresses.
Note: You do not have to use a static TCP/IP
address.
If you only want to access the master console directly,
you can use a DHCP TCP/IP address. If you use a DHCP TCP/IP address,
ensure
that the properties are set to DHCP. To access the master console remotely,
you must use a static IP address.
- Click OK until
you return to the desktop.
- Connect the Ethernet
port to the network.