lsroute

The lsroute command displays the IP routing table.

Syntax


>>- svcinfo -- -- lsroute -------------------------------------><

Description

This command displays the IP routing table. The table provides details of the gateway that is used for IP traffic to a range of IP addresses for each ethernet port. This information can be used to diagnose configuration node accessibility problems. The svcinfo lsroute command is equivalent to the Linux® route command.

An invocation example

svcinfo lsroute

The resulting output

Kernel IP routing table
Destination     Gateway      Genmask         Flags Metric Ref   Use Iface
9.71.46.0       0.0.0.0      255.255.254.0   U     0      0       0 eth0
127.0.0.0       0.0.0.0      255.0.0.0       U     0      0       0 lo
0.0.0.0         9.71.46.1    0.0.0.0         UG    0      0       0 eth0

Kernel IPv6 routing table
Destination                              Next Hop              Flags Metric Ref  Use Iface
2002:914:fc12:849::/64                   ::                    UA    256    3675   0 eth0
fe80::/64                                ::                    U     256    0      0 eth0
::/0                                     fe80::7:b4ff:fe00:500 UGDA  1024   1      0 eth0
::1/128                                  ::                    U     0      1441   1 lo
2002:914:fc12:849:214:5eff:fe33:5192/128 ::                    U     0      0      1 lo
fe80::214:5eff:fe33:5192/128             ::                    U     0      0      1 lo
ff00::/8                                 ::                    U     256    0      0 eth0