Locating the WWPN for a NetApp server

You can locate the WWPN for a NetApp server by following the steps in this topic.

1. Start the NetApp server.
2. At the NetApp system console, run the following command: sysconfig -v.

   Figure 1 shows an example of the command output where the WWPNs are 500a098200004060 and 500a098300004060.

   Figure 1. An example of the sysconfig command output

   netapp_system_console> sysconfig -v
   <snip>
           slot 0: FC Host Adapter 0a (Dual-channel, QLogic 2322 rev. 3, 64-bit, N-port,<UP>)
                   Firmware rev:   3.3.220
                   Host Port Id:   0x690913        FC Node Name:   5:00a:098200:004060
   <snip>
           slot 0: FC Host Adapter 0b (Dual-channel, QLogic 2322 rev. 3, 64-bit, N-port,<UP>)
                   Firmware rev:   3.3.220
                   Host Port Id:   0x640913        FC Node Name:   5:00a:098300:004060
   <snip>
   netapp_system_console>