Removing the support rails for the SAN Volume Controller 2145-CF8

This topic describes how to remove the SAN Volume Controller 2145-CF8 support rails.

1. Remove the SAN Volume Controller 2145-CF8 node, as described in Removing the SAN Volume Controller 2145-CF8 from a rack.
2. Remove the cable-management arm, as described in Removing the SAN Volume Controller 2145-CF8 cable-management arm.
3. Disengage the slide rails from the rear of the rack.
   1. Push in the pins in the order shown by  1  and  2  in Figure 1.
   2. Lift slightly; then push back on the rail  3 .
   Figure 1. Disengaging the SAN Volume Controller 2145-CF8 slide rails from the rear of the rack

   
4. Remove the side rails from the front of the rack and remove the rails.
   1. To remove the slide rails from the front of the rack, push up the front tab ( 1  in Figure 2) and slide out the front latch  2 .
   2. Lift up slightly ( 3 ); then slide the rail backward  4 . Remove the slide rail from the rack.
   Figure 2. Removing the SAN Volume Controller 2145-CF8 slide rails from the rack