Removing the SAN Volume Controller 2145-4F2 top cover

You can remove the top cover.

Important: Before you turn on the node, replace the cover for proper cooling and airflow. Operating the node for extended periods of time (more than 30 minutes) with the cover removed might damage components.
Perform the following steps to remove the top cover from the SAN Volume Controller 2145-4F2:
  1. Remove all power from the SAN Volume Controller 2145-4F2. See MAP 5350: Powering off a SAN Volume Controller node.
  2. Remove the SAN Volume Controller 2145-4F2 from the rack.
  3. Lift the lever (number one in Figure 1). This action moves the top cover rearward approximately 13 mm (0.5 in).
    Figure 1. Removing the SAN Volume Controller 2145-4F2 cover
    This figure illustrates the release button for removing the SAN Volume Controller 2145-4F2 cover
  4. Lift the front of the cover, and lift the cover away from the SAN Volume Controller 2145-4F2 and set it aside.
Parent topic: Removing the top cover
Library | Support | Terms of use | Feedback
© Copyright IBM Corporation 2003, 2009. All Rights Reserved.