Replacing the SAN Volume Controller 2145-4F2 disk drive cables

The disk drive cables must be replaced if they are removed.

1. Connect the SCSI signal connector  and the power connector  to the back of the disk drive, as shown in Figure 1, and then replace the cable.
   Figure 1. SAN Volume Controller 2145-4F2 disk drive and front panel

   
2. Replace the top cover on the SAN Volume Controller 2145-4F2 node.
3. Place the SAN Volume Controller 2145-4F2 node in the rack.
4. Return power to the SAN Volume Controller 2145-4F2 node.