Replacing the SAN Volume Controller 2145-8A4 operator-information panel

You might have to replace the operator-information panel assembly on a SAN Volume Controller 2145-8A4 due to required maintenance.

1. Connect the light panel cable and the front USB cable , shown in Figure 1, to the operator-information panel board.
   Figure 1. SAN Volume Controller 2145-8A4 operator-information panel
2. Guide the operator-information panel into position on top of the CD/DVD bay housing. Make sure that the LEDs and the USB connectors are aligned with the openings in the bezel and that the holes in the board align with the screw holes in the top of the bay housing.
3. Tighten the screws to secure the operator-information panel onto the top of the CD/DVD bay housing.
4. Replace the top cover. See Replacing the top cover.
   
5. Place the node in the rack. See Replacing the SAN Volume Controller in a rack.
   
6. Connect the power cable to the node and replace the cable-retention bracket. See Replacing the cable-retention bracket.
   
7. Turn on the node.