<?php
/****************************************************************************** 
 * Copyright 1991-2015 by Quantum Corporation.  All rights reserved.
 * No part of this work may be reproduced or transmitted in any
 * form or by any means, electronic or mechanical, including
 * photocopying and recording, or by any information storage
 * or retrieval system, except as may be expressly permitted by
 * the 17 U.S.C. section 101, et. seq., or in writing by
 * Quantum Corporation.
 *******************************************************************************/
include('user_inc.htm');

/*###########################################################################
# NOTE: wmg 12-15-09
# When this page changes to allow multiple failover drives it will be much
# easier to JUST REWRITE THIS PAGE, instead of trying to get multiple fail
# overs to work.
############################################################################*/

$maxLicense = get_max_dps_drive_cnt($user);
error_log( "maxLicense = ". $maxLicense );

if ($_SERVER[REQUEST_METHOD] == "POST")
{
   error_log($_SERVER['REQUEST_URI']." POST = ". print_r($_POST, true) );

   $libraryGUID      = $_POST['libraryGUID'];
   $controlPathGUID  = $_POST['controlPathGUID'];
   $failOverGUID     = $_POST['failOverGUID'];

   $OrigfailOverGUID = $_POST['OrigfailOverGUID'];
   $OrigCPGUID       = $_POST['OrigCPGUID'];
   $CntrlPathguids   = $_POST['controlPathGUIDs'];
   $controlType      = $_POST['controlType'];


   // if empty then combo box did not change only the control path changed.
   if ($controlType == "") 
   {
      $controlType = get_control_path_type($user, $libraryGUID);
   }

   $changed = true;
   if( $changed )
   {
      $driveTypes = array();
      $drives = get_all_drives_by_library($user, $libraryGUID, $sortCriteria, (int)0,(int)MEDIA_TYPE_ANY);
      foreach( $drives as $drive )
      {
          $driveTypes[$drive->guid] = $drive->vendor.$drive->driveType;
      }

      // Required to support the operation in progress dialog.
      $operationInProgress = true;
      $status = new ReturnStatus();

      if( $maxLicense != 0 ) // Only do this if DPS is licensed.
      {
          // If the drives are HP LTO5 or HP LTO6 then release the old licneses
          if( $driveTypes[$OrigCPGUID] == "HPLTO-5" || $driveTypes[$OrigCPGUID] == "HPLTO-6" )
          {
              // Delete all the OLD control paths and failovers...
              error_log("Releasing the CPF license for the OLD CP drive while preserving LMEEnabled and DPF.");
              $DPSLicense = get_dps_license($user, $OrigCPGUID);
              $return     = submit_dps_license($user, $OrigCPGUID, 0, $DPSLicense->LMEnabled, $DPSLicense->DPFEnabled, $DPSLicense->FIPSEnabled);
              //error_log("submit_dps_license1 returned ". $return);
     
              if( $OrigfailOverGUID != "" )
              {
                  error_log("Releasing the CPF license for OLD Failover drive while preserving LMEEnabled and DPF.");
                  $DPSLicense = get_dps_license($user, $OrigfailOverGUID);
                  $return     = submit_dps_license($user, $OrigfailOverGUID, 0, $DPSLicense->LMEnabled, $DPSLicense->DPFEnabled, $DPSLicense->FIPSEnabled);
                  //error_log("submit_dps_license2 returned ". $return);
              }
          }
          else
              error_log("Not an HP LTO-5 or HP LTO-6 - Skipping all SNW licensing...");
      }

      // See if a CPF drive was set. Only run one of the CP functions - not both.
      if(  $failOverGUID != "" )
      {
          // No need to check the licnesing here we could not have got here it it was not licnesed.

          error_log("Setting the FailOver Drive to $failOverGUID - Consuming 2 SNW licenses");
          // Consume a DPS license for the command path and the failover.

          $DPSLicense = get_dps_license($user, $controlPathGUID);
          $return     = submit_dps_license($user, $controlPathGUID, 1, $DPSLicense->LMEnabled, $DPSLicense->DPFEnabled, $DPSLicense->FIPSEnabled);
          //error_log("submit_dps_license3 returned ". $return);
          $DPSLicense = get_dps_license($user, $failOverGUID);
          $return     = submit_dps_license($user, $failOverGUID, 1, $DPSLicense->LMEnabled, $DPSLicense->DPFEnabled, $DPSLicense->FIPSEnabled);
          //error_log("submit_dps_license4 returned ". $return);

          $Ret = set_command_path_failover($user, $libraryGUID, $controlPathGUID, $failOverGUID);
          error_log("set_command_path_failover returned a $Ret");
      }
      else if ($CntrlPathguids != "")
      {
          $driveGuids = split(':', $CntrlPathguids);

          error_log( "- - - - - -  set_multi_command_path_drives($user, $libraryGUID, $driveGuids, $controlType) " );

          set_multi_command_path_drives($user, $libraryGUID, $driveGuids, $controlType);
      }
      else
      {
          error_log( "- - - - - - - -  set_controlPath($user, $libraryGUID, $controlPathGUID, $controlType) " );
          set_command_path_drive($user, $libraryGUID, $controlPathGUID, $controlType);
      }
      print $status->out();
      return;
   }
   return;
}

// Get the number of logical libraies so we know if we need to bring up the partition Select page or not.   
$libs = get_logical_libraries_brief($user);

// Remove any library-managed partitions from the list, as they
// can't have control paths.
foreach($libs as $k => $lib)
{
   if($lib->library_managed)
   {
      unset($libs[$k]);
      continue;
   }

   // Set the number of SNW licenses in use for each partition
   $libs[$k]->snwCount = get_dps_used_count_for_partition($user, $lib->guid);
}

$lib_count = count($libs);

$usedDpsLicneses = get_dps_used_count($user);
?>

<html lang="en">
<head>
<title>Control Path</title>
<link rel="stylesheet" type="text/css" href="css/style.css">
<script type="text/javascript" src="js/common.js"></script>
<script type="text/javascript" src="js/loading.js"></script>
<script type="text/javascript" src="js/paging.js"></script>
<script type="text/javascript">
   var libValue;
   var libName = "";
   var maxLicense = <?=$maxLicense?>;
   var usedLicense = <?=$usedDpsLicneses?>;
   var usedLicensesByOthers = 0;
   
   function next()
   {
      var libs = document.forms['libraryForm'].getElementsByTagName('input');
      
      for (i = 0; i < libs.length; i++)
      {
         if( (libs[i].type == "radio") && (libs[i].checked) )
         {
            var lib = libs[i].value;
            var litems = lib.split(":");
            
            document.getElementById('libraryNameMedia').innerHTML =
                  "<b>" + litems[0] + " (" + litems[2] + ")" + "</b>";
            
            document.forms['sourceForm'].libraryGUID.value = litems[1];
            // Must save the GUID in the resultForm form - or it will be blank when we post.
            document.forms['resultForm'].libraryGUID.value = litems[1];
            
            document.getElementById('sourceList').src = "ControlPathList.htm?libraryGUID=" + litems[1];
            
            // Calculate DPS licenses used by other partitions
            usedLicensesByOthers = usedLicense - litems[4];

            switchDiv('header','defineMove');
            return;
         }
      }
      alert("Please select a partition.");
   }
   
    function doSetCP()
    {
        var gotone = 0;
        var sameFO = 0;
        var sameCP = 0;
        var radioList = self.frames["sourceList"].document.forms[0].getElementsByTagName('input');
        var origCP = null;
        var origFO = null;
        var isP2P = true;
        var isFailover = false;
        var isMultipath = false;
        var newSnwCount = 0;
        var snwUsers = new Array();
        var tmpCntrlPaths = "";
        var numSelected = 0;

        if( self.frames["sourceList"].document.forms[0].origControlPath )
        {
            origCP = self.frames["sourceList"].document.forms[0].origControlPath.value;
            //alert(radioList[i].name + "origCP= " + origCP);
        }
        if( self.frames["sourceList"].document.forms[0].origFailOver )
            origFO = self.frames["sourceList"].document.forms[0].origFailOver.value;

        for (i=0; i<radioList.length; i++)
        {
            //alert("Radio Type List= " + radioList[i].type + " checked= " + radioList[i].checked);
            if( radioList[i].type == 'radio' )
            {
               tValue = radioList[i].value.split(":");

               //alert("RadioList checked= " + radioList[i].checked + "RadioList tValue= " + tValue);

               if(radioList[i].checked)
               {
                   //alert(radioList[i].name + " = " + radioList[i].value +" > "+ tValue[0] +" - "+ tValue[1] + " !"+ "origCP= " + origCP + "gotone= " + gotone);
                   if( radioList[i].name == "FailOver" )
                   {
                       //alert("In FailOver "+radioList[i].name);
                       // Save the CPF data if its one.
                       document.forms['resultForm'].failOverGUID.value = tValue[0];
                       isFailover = true;
                       if( tValue[1] != 3 )
                       {
                           isP2P = false;
                           break;
                       }
                       if( tValue[0] == origFO )
                           sameFO = 1;
                   }
                   else if( tValue[0] == origCP )
                   {
                       sameCP = 1;
                   }
                   else if( gotone == 0 )
                   {
                       // Save the Drive GUID - so it can be passed to set_control_path
                       document.forms['resultForm'].controlPathGUID.value = tValue[0];
                       if( tValue[1] != 3 )
                       {
                           isP2P = false;
                           // Keep going when a control path is not point to point because if there is not a fiaover - this is fine.
                       }
                       gotone = 1;
                   }
                }

               // Look for potential SNW license usage - either using some other SNW feature,
               // or may be set as a CPF/failover drive.  We only check licenses if a failover is
               // found in the code above, so increment for all checked radio buttons.
               if((radioList[i].name == "FailOver" && tValue[3] == "1") || radioList[i].checked)
               {
                  // Potential license user - see if we tracked it yet.
                  if(snwUsers.indexOf(tValue[0]) < 0) 
                  {
                     snwUsers.push(tValue[0]);
                     newSnwCount++;
                  }
               }
            }
            else if( radioList[i].type == 'checkbox')
            {
                if(radioList[i].checked)
                {
                    tValue = radioList[i].value.split(":");
                    //alert(radioList[i].name + " = " + radioList[i].value +" > "+ tValue[0] +" - "+ tValue[1] + " !"+ " origCP= " + origCP + " gotone= " + gotone);

                    if( tValue[0] == origCP )
                    {   
                        sameCP = 1;
                        if (tmpCntrlPaths == "")
                            tmpCntrlPaths = tValue[0];
                        else
                            tmpCntrlPaths = tmpCntrlPaths + ":" + tValue[0];


                        numSelected++;
                    }
                    else 
                    {
                        if (tmpCntrlPaths == "")
                        {
                           // store the input values to temporary variables
                           tmpCntrlPaths = tValue[0];
                           numSelected++;
                        }
                        else
                        {
                           // append the input values to temporary variables, 
                           // separating input by a ':'
                           tmpCntrlPaths = tmpCntrlPaths + ":" + tValue[0];
                           numSelected++;
                        }
                        // Save the Drive GUID - so it can be passed to set_control_path
                        //document.forms['resultForm'].controlPathGUID.value = tValue[0];
                        //alert("NumberSelcted= " + numSelected + " tmpCntrlPaths= " + tmpCntrlPaths);
                    }
                    
                    if (numSelected > 1)
                    {
                        document.forms['resultForm'].controlPathGUIDs.value = tmpCntrlPaths;
                        gotone = 1;
                        sameCP = 0;
                        sameFO = 0;
                        isMultipath = true;
                    }
                    else
                    {
                        document.forms['resultForm'].controlPathGUIDs.value = "";
                        gotone = 0;
                        isMultipath = false;
                    }


                    if(radioList[i].checked)
                    {
                       // Potential license user - see if we tracked it yet.
                       if(snwUsers.indexOf(tValue[0]) < 0) 
                       {
                          snwUsers.push(tValue[0]);
                          newSnwCount++;
                       }
                    }
                }
            }
        }
        
        // Set "sameFO" if original was null, and nothing is selected now
        if(!isFailover && origFO == null) sameFO = true;

        if( isFailover || isMultipath )
        {
            // See if we will exceed the licneses
            if( usedLicensesByOthers + newSnwCount > maxLicense )
            {
                alert ("The new configuration exceeds the number of currently licensed SNW drives.\n\n" + 
                       "The current license allows for up to " + maxLicense + " SNW drives to be configured.\n" +
                       "The new configuration requires a minimum of " + (maxLicense+2) + " SNW drives to be licensed.");
                return;
            }
        }

        if( !isP2P && isFailover )
        {
            alert("All drives selected must be set to \"Point to Point\" when enabling Failover.\nGo to \"Setup->Drive Settings\" to change the topology to \"Point to Point\".");
            return;
        }

        if( sameCP && sameFO )
        {
            alert("The control path was not changed");
            return;
        }
    
        if( !gotone && !sameCP)
        {
          // We need to clear the Control Path Drive so it is not sent to the set function.
          document.forms['resultForm'].controlPathGUID.value = "";
//         alert('Please select a drive to be the control path');
//         return;
        }

        if (!isMultipath)
        {
            document.forms['resultForm'].controlPathGUIDs.value = "";
        }

        // Make sure if we are setting up a failover that both drives are in Point-To-Point

        var sWarn = "Before making the change, please make sure the current control path is not currently in use.\n" + 
                    "Any software configured to use the current control path will need to be reconfigured to use the new control path. " +
                    "Press OK to proceed with the control path change.";
        
        if( !confirm( sWarn ) )
            return;
        
        var action = "Setting Control Path Drive";
        //      document.forms['resultForm'].libraryGUID.value = <?= $libraryGUID ?>;
        
        openProgressWindow(action, 2);
    }

    function setSectionType(aSel)
    {
        $cntrlType = document.getElementById("cpType").value;
        document.getElementById('sourceList').contentWindow.SwitchInputType(aSel, $cntrlType);

        document.forms['resultForm'].controlType.value = $cntrlType;

    }

    driveCols = new Array("s_ControlPath", "s_location", "s_interfaceType");
   
    var launchProgressWindowDo="progressWindowIndex.htm";
    var progressWindowDo="progressWindow.htm";
</script>
</head>

<body onload="javascript:{if(parent.frames[1]&&parent.frames['topFrame'].Go)parent.frames['topFrame'].Go();}OnlyOnePartition(<?=$lib_count?>, next, 'header');IsPageLoaded();">
<input type="hidden" id="<?=ROBOHELP_ID?>" value="<?=Selecting_the_Control_Path?>" />
<a name="topPage"></a>

<div id="header" class="hiddenDiv">
<form name="libraryForm" method="post" action="" target="">
  <table id="titleTable" align="center"><tr>
     <td class="headingTitle">Setup - Control Path</td>
  </tr><tr>
    <td class="headingInfo">
         Set the control path for the current partition.<br>
      </td>
  </tr></table>

  <br>
<?php

if( $libs == "None" )
{
?>
<table id="dataTableOuter" align="center">
<tr>
   <td> 
      <table id="dataTableInner" cellpadding="3" cellspacing="0" align="center"> 
      <tr>   
         <td align="center" width="100%"> 
            <b>There were no partitions found matching the requested criteria.</b>
         </td>
      </tr>
      </table> 
   </td>
</tr>

<?php
}
else
{
?>
<table id="dataTableOuter" align="center">
<tr>
   <td> 
      <table id="subHeadingTable" align="center">
      <tr>   
         <td width="60%">Name:</td> 
         <td >Mode:</td> 
      </tr>
      </table> 
   </td>
</tr>

<?php

   function sort_by_name($a, $b)
   {
      return ($a->name == $b->name) ? 0 : (($a->name < $b->name) ? -1 : 1);
   }
   if( ! isset($libs) )
   {
      error_log("\nGetting logical Libraires in partitionList.htm!\n");
      $libs = get_logical_libraries_brief($user);
      $lib_count = count($libs);
   }
   else if( ! isset($libs) )
      $lib_count = count($libs);

   usort($libs, 'sort_by_name');
   $checked = "checked";
   foreach ($libs as $lib)
   {
?>
<tr>
   <td> 
      <table id="dataTableInner" cellpadding="3" cellspacing="0" align="center"> 
      <tr>   
         <td width="60%"> 
            <input type="radio" name="libname" value="<?= $lib->name.':'.$lib->guid.':'.$lib->status.':'.$lib->library_managed.':'.$lib->snwCount ?>" <?= $checked ?>>
               &nbsp;<b><?= $lib->name ?></b>
             </td>
             <td><b><?= $lib->library_managed ? "N/A" : $lib->status ?></b> </td>
      </tr>
      </table> 
   </td>
</tr>
<?php
      $checked = "";

$cpType = get_control_path_type($user, $lib->guid);
error_log( "aaaaaControlType = ". $cpType );
   }
} // if libs == none
?>
</table>
  <br>
  <table class="navbar" id="button" align="center"><tr>
     <td>
         <a href="javascript:loadHomePage();"
            onmouseover="changeImage(1,'cancel');window.status='Return to previous page'; return true;"
            onmouseout="changeImage(0,'cancel');window.status=''; return true;"
            onclick="switchDiv('header','header');">
         <img name="cancel" title='Return to home page' src="images/buttons/cancel.gif" border="0"></a>

         <a href="javascript:void(0);"
            onmouseover="changeImage(1,'next','next2');window.status='Select drives'; return true;"
            onmouseout="changeImage(0,'next','next2');window.status=''; return true;"
            onclick="next();">
         <img name="next2" src="images/buttons/next.gif" border="0"></a>
      </td>
  </tr></table>
</form>
</div>

<div id="defineMove" class="hiddenDiv">
   <table id="titleTable" align="center"><tr>
      <td class="headingTitle">Control Path - <span id='libraryNameMedia'>LibraryName</span></td>
   </tr><tr>

   <table id="titleTable" align="center"><tr>
         <td class="headingTitle">Select Control Path Type</td></tr>
   
        
   <table id="titleTable" align="center"><tr>
<?php
              
      
      $isBlade = 0;

      //$cpType = $_POST['controlPathType'];
      echo '<td width="'. $i_columnSize[0] .'%" class="mediareport" align=left>';
      echo '<input type="hidden" id="cntrlType'. $currentIndex .'" name="cntrlType'. $currentIndex .'"';
      echo ' value="'.$cpType.'" >';

      if (!$isBlade)
      {
         // Show Control Path list
         $sCPType = array("Unknown", "Standard", "Basic Path Failover", "Multi-Path", "Advanced Path Failover");
         echo "<select id='cpType' name='cpType'  onchange='setSectionType(this)'size='1'". ">";
         for( $j=1; $j < count($sCPType); $j++ )  
         {
             echo "<option value=". $j;
             if( $cpType == $j )
             { 
                 echo " SELECTED";
             }
             echo ">". $sCPType[$j] ."</option>\n";
         }
         echo "</select> </td>";
      }
      else
      {       
          $cpType = 1;
          echo "FC I/O Blade </td>";
      }
      echo '</tr>';
?>
<?php
      //<td class="headingInfo">
      //   Select a tape drive to host the library control path for this partition.
      //   If an HP LTO-5 or HP LTO-6 FC tape drive (that is not connected to an installed FC I/O Blade) is selected
      //   as the control path drive, you may select another HP LTO-5 or HP LTO-6 FC tape drive to use as the control path failover drive.
      //   Note: To disable a control path or failover drive, click the current selection to deselect it, or make a different selection.
      //</td>
?>
<?php
     if( $maxLicense == 0 )
     {
         if ($cpType == 3)
         {
?>
   </tr><tr><td>

       <font color="red">Control path failover is unavailable. You have 
       insufficient Storage Networking licenses installed to cover all HP LTO-5 and HP LTO-6 
       tape drives in the library.</font>
   </td>
<?php
         }
         else if ($cpType == 4) 
         {
?>
   </tr><tr><td>

       <font color="red">Multipath is unavailable. You have 
       insufficient Storage Networking licenses installed to cover all HP LTO-5, HP LTO-6, IBM LTO-5, 
       IBM LTO-6, and IBM LTO-7 tapes drive in the library.</font>
   </td>
<?php
         }
         else if ($cpType == 5)
         {
?>
         </tr><tr><td>

             <font color="red">Advance CPF is unavailable. You have 
             insufficient Storage Networking licenses installed to cover all IBM LTO-5, 
             IBM LTO-6, and IBM LTO-7 tapes drive in the library.</font>
         </td>
<?php
        }
     }
?>

   </tr></table>

   <br>
<form name="sourceForm" method="post" action="/ControlPathList.htm" target="sourceList">
  <input type="hidden" name="pages" value="1">
  <input type="hidden" name="numRows" value="100">
  <input type="hidden" name="currentPageNumber" value="1">
  <input type="hidden" name="orderOn" value="s_location">
  <input type="hidden" name="orderBy" value="ASC">
  <input type="hidden" name="filterPattern" value="">
  <input type="hidden" name="filterColumn" value="">
  <input type="hidden" name="serialNumber">
  <input type="hidden" name="libraryGUID" value="">

      <table class="tableTopHeader" cellpadding="0" cellspacing="0" align="center" >
      <tr>
           <td width="100%" class=headingInfo align="right" valign="middle" nowrap><b>Total Drives: &nbsp;<span id="s_dispNumRows">0</span></b> </td>
      </tr>
      </table>


   <table class="mediaListTableBorder" cellpadding="2" cellspacing="0" align="center" width="100%">

      <tr>
      <td>
         <table class="mediaListTable" cellpadding="0" cellspacing="0" align="left" width="100%"><tr>
            <td width="15%" align="center" nowrap>  
               Drive Type</td>
            <td width="14%" align="center" nowrap> <a href='javascript:sortByOnForm("sourceForm", "s_interfaceType", driveCols);'> 
               <img name="s_interfaceType" src="images/clear.gif" border=0>Interface Type</a></td>
            <td width="14%" align="center" nowrap> <a href='javascript:sortByOnForm("sourceForm", "s_location", driveCols);'> 
               <img name="s_location" src="images/clear.gif" border=0>Location</a></td>
            <td width="14%" align="center" nowrap>  
               <img name="s_ControlPath" src="images/clear.gif" border=0>Control Path </td>
            <td width="14%" align="center" nowrap>  
               Failover</td>
            <td width="14%" align="center" nowrap>  
               Is Active</td>
            <td width="15%" align="center" nowrap>  
               FC I/O Blade Connected</td>
         </tr></table>
      </td>
   </tr></table>

   <table class="mediaListTableBorder" cellpadding="0" cellspacing="0" align="center" ><tr>
      <td>
         <script>
            if (isNetscape()) {
               document.write('<iframe id="sourceList" name="sourceList" src="blank.htm" width="99%" height="100%" scrolling="auto" marginwidth="1" marginheight="1" align=center></iframe>');
            }
            else {
               document.write('<iframe id="sourceList" name="sourceList" src="blank.htm" width="100%" height="100%" scrolling="yes" marginwidth="1" marginheight="1" align=center></iframe>');
            }
         </script>
      </td>
   </tr></table>

   <table class=mediaListTableBorder cellpadding=2 cellspacing=0 align=center><tr>
      <td>
         <table class=reportMenuItems cellpadding=2 cellspacing=0><tr>
            <td align=left>
               <a href="javascript:showPageForForm('sourceForm', 'sourceList', 'back', 's_');"
                  onMouseOver="changeIcon(1,'lft_arrow');"
                  onMouseOut="changeIcon(0,'lft_arrow');">
               <img name=lft_arrow align=center title="Back one page" src="images/icons/lft_arrow.gif" border=0></a>&nbsp;

               <a id="reportLinks" href="javascript:showPageForForm('sourceForm', 'sourceList', 'value', 's_');"
                  onMouseOver="window.status='Go to specified page'; return true;"
                  onMouseOut="window.status=''; return true;">Page</a>&nbsp;
               <div class="hiddenDiv"><input name=EnterFix type=text ><!--Fix the ENTER=Submit browser problem--></div>

               <input type=text name=number size=2 value=1  onKeyUp="checkValidPageNumberX(this, event, 'sourceForm', 'sourceList', 's_');">
               <b>&nbsp;of <span id="s_dispNumPages"></span>&nbsp;</b>

               <a href="javascript:showPageForForm('sourceForm', 'sourceList', 'next', 's_');"
                  onMouseOver="changeIcon(1,'rt_arrow');window.status='Next page'; return true;"
                  onMouseOut="changeIcon(0,'rt_arrow'); window.status=''; return true;">
               <img name=rt_arrow align=center src="images/icons/rt_arrow.gif" border=0></a> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
            </td>
        <td align=center>
           <b>Drives:&nbsp;<span id="s_dispLowPageRows">1</span>&nbsp;-&nbsp;<span id="s_dispHighPageRows">6</span></b>
        </td>
         </tr></table>
      </td>
   </tr></table>
</form>

   <br>
   <table class="navbar" id="button" align="center"><tr>
      <td>
         <a href="javascript:void(0);"
            onmouseover="changeImage(1,'back','back2');window.status='Return to select source'; return true;"
            onmouseout="changeImage(0,'back','back2');window.status=''; return true;"
            onclick="switchDiv('defineMove','header');">
         <img name="back2" title="Back one page" src="images/buttons/back.gif" border="0"></a>

         <a href="javascript:loadHomePage();"
            onmouseover="changeImage(1,'cancel');window.status='Return to previous page'; return true;"
            onmouseout="changeImage(0,'cancel');window.status=''; return true;"
            onclick="switchDiv('loadSelectedPartition','header');">
         <img name="cancel" title='Return to home page' src="images/buttons/cancel.gif" border="0"></a>

         <a href="javascript:doSetCP();"
            onmouseover="changeImage(1,'apply');window.status='Import media'; return true;"
            onmouseout="changeImage(0,'apply');window.status=''; return true;">
         <img name="apply" src="images/buttons/apply.gif" border="0"></a>
      </td>
   </tr></table>

  <form name="resultForm" method="post" action="<?= $_SERVER[REQUEST_URI] ?>" target="returnStatus">
    <input type="hidden" name="libraryGUID" value="">
    <input type="hidden" name="controlPathGUID" value="">
    <input type="hidden" name="failOverGUID" value="">
    <input type="hidden" name="OrigfailOverGUID" value="">
    <input type="hidden" name="OrigCPGUID" value="">
    <input type="hidden" name="controlPathGUIDs" value="">
    <input type="hidden" name="controlType" value="">
       
  </form>

</div>
<?php
include('progressWin_inc.htm');
?>
</body>
</html>