<?php
/****************************************************************************** 
 * Copyright 1991-2012 by Quantum Corporation.  All rights reserved.
 * No part of this work may be reproduced or transmitted in any
 * form or by any means, electronic or mechanical, including
 * photocopying and recording, or by any information storage
 * or retrieval system, except as may be expressly permitted by
 * the 17 U.S.C. section 101, et. seq., or in writing by
 * Quantum Corporation.
 *******************************************************************************/
/****************************************************************************** 
 * Name:  reportSystemConfig.htm
 * Purpose: System Configuration Report 
 * $Id: reportSystemConfig.htm 1.39 2007/09/13 16:55:42MDT Bill Gray (bgray) dev  $
 *******************************************************************************/

$isReportPopup = 1;    // Set so we do not release the Service menu RAS Token when bringing up a report.

include ('common_user_inc.htm');
include ('IOB_inc.htm');

$perferedServerType = get_ekm_type($user);

error_log("get_date_and_time...");
$date = get_date_and_time($user);
$formattedDate = strftime("%B %e, %Y", $date->timestamp);
$formattedTime = strftime("%k:%M", strtotime($date->month."/".$date->day."/".$date->year." ".$date->hour.":".$date->minute.":".$date->second));

// Check the timezone to see if it is custom.  If so,
// "Custom" will be shown as the timezone in the report.
error_log("get_custom_tz_dst...");
$ret_val = get_custom_tz_dst($user);
$ret_val_array = explode ("?",$ret_val->custom_tz_dst);
$CustomTZMethod = $ret_val_array[0];
$UseCustomTZ = ($CustomTZMethod == 'EXACT');

error_log("get_network_configuration_ipv4...");
$networkConfig = get_network_configuration_ipv4($user);
error_log("get_product_info...");
$productInfo = get_product_info($user);
error_log("Product Info = " . print_r($productInfo, true ));

$sortCriteria = new SortCriteria();
$sortCriteria->sortColumn = 3;
$sortCriteria->ascending = 1;
$sortCriteria->filterPattern = "*";
error_log("get_all_drives_ex...");
$drives = get_all_drives_ex($user, $sortCriteria);
error_log("get_blades...");
$iobs = get_blades($user);
error_log("FC I/O Blades = " . print_r($iobs, true ));
error_log("get_eeblades...");
$eebs = get_eeblades($user);
error_log("EE Blades = " . print_r($eebs, true ));

$sort = new SortCriteria();
error_log("get_logical_libraries...");
$libs = get_logical_libraries($user, $sort);

error_log("is_ipv6_enabled...");
$IPv6Enabled = is_ipv6_enabled();
error_log("get_all_ipv6_addresses...");
$ipv6Addrs = get_all_ipv6_addresses();
error_log("ipv6Addrs = ". print_r($ipv6Addrs, true ) );
//$ipv6Addrs = array("2001::55:ee/64", "2001::55:3e/64", "2001::55:2e/64", "2001::55:1e/64", "2001::55:e9/64", "2001::55:e8/64", "2001::55:e7/64", "2001::55:e6/64", "2001::55:e5/64", "2001::55:e4/64", "2001::55:e3/64", "2001::55:e2/64", "2001::55:e1/64" );

$summary = get_library_summary_info($user);
$is5U = $summary->modules == 1;

// Try the GUI over ride first
$Brand = getenv(ADICLIBRARY_BRAND_GUI);
if( $Brand == "" )
$Brand = getenv(ADICLIBRARY_BRAND);

switch( $Brand )
{
    case 'ibm':
      $theSN = $productInfo->alternateId;
      break;
    case 'dell':
      $theSN = $productInfo->serialnumber;
      break;
    case 'tandberg':
      $theSN = $productInfo->serialnumber;
      break;
    case 'adic':
      $theSN = $productInfo->serialnumber;
      break;
    case 'quantum':
      $theSN = $productInfo->serialnumber;
      break;
}

$ApolloVer = "";

// Is this an Apollo robot?
error_log("get_firmware_versions...");
$descriptions = get_firmware_versions($user);
error_log("get_firmware_versions = ". print_r($descriptions, true) );
$isApollo = false;
foreach($descriptions as $description)
{
    // CR 19990 Do not diaply the Apollo imager version
    if( $description->component == "Robot Firmware" )
    {
      $ApolloVer = $description->version;
      if($ApolloVer == "")  // If the robot is dead this can come back blank
          $ApolloVer = "N/A";
      break;
    }
}

//////////////////////////////////
// Handle the encryption stuff
//////////////////////////////////

error_log("is_ibm_encryption_licensed...");
$doEKM  = is_ibm_encryption_licensed($user);
$doQEKM = false;
$doSKM  = false;
$doRKM  = false;
$doKMIP = false;
$doTKLM = false;

if ($doEKM)
{
    error_log("get_ekm...kmip");
    $kmip_data = get_ekm( $user, 4 );
    error_log("kmip_data = ". print_r($kmip_data, true) );
    if(($kmip_data->primaryIP != "") && ($perferedServerType == 4))
        $doKMIP = true;

    error_log("get_ekm...rkm");
    $rkm_data = get_ekm( $user, 3 );
    error_log("rkm_data = ". print_r($rkm_data, true) );
    if(($rkm_data->primaryIP != "") && ($perferedServerType == 3))
        $doRKM = true;

    error_log("get_ekm...skm");
    $akm_data = get_ekm( $user, 2 );
    error_log("akm_data = ". print_r($akm_data, true) );
    if(($akm_data->primaryIP != "") && ($perferedServerType == 2))
    {
        $doSKM = true;

       // Try to get whatever S/Ns we can
       error_log("akm_get_server_serial_numbers...");
       $akmSNs = @akm_get_server_serial_numbers($user);
       error_log("akm_get_server_serial_numbers returned ". print_r($akmSNs,true) );

        error_log("akm_servers_available...");
        $akmServAvail = @akm_servers_available($user);
    
        if ($akmServAvail == 1) // Ensure that both are up 
        {
            error_log("akm_get_software_version...");
            $qkmVer = @akm_get_software_version($user);
            error_log("akm_get_software_version returned ". print_r($qkmVer,true) );
        }
        else
        {
            $qkmVer = "Unknown";
            error_log("akm servers not available, setting qkm version to Unknown");
        }
    }

    error_log("get_ekm...");
    $ekm_data = get_ekm( $user, 1 );
    error_log("ekm_data = ". print_r($ekm_data, true) );
    if(($ekm_data->primaryIP != "") && ($perferedServerType == 1))
        $doQEKM = true;
    
    error_log("get_ekm... (tklm)");
    $tklm_data = get_ekm( $user, 5 );
    error_log("ekm_data = ". print_r($tklm_data, true) );
    if(($tklm_data->primaryIP != "") && ($perferedServerType == 5))
        $doTKLM = true;

    $ekmServerDefault = "";  // If this is blank the display will show QKM or Q-EKM else it will so what is in the var.
    error_log("get_ekm_ssl...");
    $sslEnabled = $ekm_data->sslEnabled? Enabled : Disabled;//get_ekm_ssl($user)? Enabled : Disabled;


    // If no settings have been saved don;t show encryption
    if( !$doRKM && !$doQEKM && !$doSKM && !$doKMIP && !$doTKLM )
        $doEKM = false;


}

//////////////////////////////////
// Handle the EDLM stuff
//////////////////////////////////

$hasEDLM = is_feature_licensed($user, "EDLM");
$apps = array();
$pluginMap = array();
$appMap = array();

if($hasEDLM)
{
   $apps = edlm_get_external_apps($user);
   foreach(edlm_get_plugins() as $plugin)
   {
      $pluginMap[$plugin->id] = $plugin->name;
   }

   foreach($apps as $app)
   {
      $appMap[$app->id] = $app->name;
   }
}

?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html lang="en">
<head>
<title>System Information Report</title>

<?
css("style");
js("common");
?>

</head>

<body>
<input type="hidden" id="<?=ROBOHELP_ID?>" value="<?=Viewing_the_System_Configuration?>" />

<?php
include ('reportHeader.htm');
?>

<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

<!-- System Date & Time -->

<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>Date & Time</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="33%" align=center><b>Date</b></td>
          <td width="33%" align=center><b>Time</td>
          <td width="33%" align=center><b>Time Zone</td>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
           <td width="33%" align=center><?=  $formattedDate ?></td>
           <td width="33%" align=center><?= $formattedTime ?> </td>
           <td width="33%" align=center><?= $UseCustomTZ?"Custom":$date->timezone ?> </td>
         </tr>
      </table>
    </td>
  </tr>
</table>

<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>Physical Library</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="25%" align=center><b>Host Name</b></td>
          <td width="25%" align=center><b>IPv4 Address</b></td>
          <td width="25%" align=center><b>Serial Number</b></td>
          <td width="25%" align=center><b>Firmware Version</b></td>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
            <td width="25%" align=center><?= $networkConfig->hostname ?> </td>
            <td width="25%" align=center><?= $networkConfig->ip ?> </td>
            <td width="25%" align=center><?= $theSN ?> </td>
            <td width="25%" align=center><?= $productInfo->productversion ?> </td>
         </tr>
      </table>
    </td>
  </tr>


<?php
    if( $IPv6Enabled )
    {
?>  

  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="100%" align=center colspan="4"><b>IPv6 Addresses</b></td>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
<?php
        for( $row=0 ;; $row++ )
        {
?>        
        <tr>
<?php
            for($col=0; $col<4; $col++)
            {
                if( !isset($ipv6Addrs[$col+($row*4)]) )
                    break;
?>
          <td width="25%" align=center><?= $ipv6Addrs[$col+($row*4)] ?></td>
<?php
            }
?>
        </tr>
<?php
            if( !isset($ipv6Addrs[$col+($row*4)]) )
                break;
        }
?>
      </table>
    </td>
  </tr>
<?php
    }//is IPv6 enabled
?>
</table>

<br>
<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
<?php
     if( $ApolloVer == "" )
     {
?>
          <td width="50%" align=center><b>BSP Level</b></td>
          <td width="50%" align=center><b>Last update</b></td>
<?php
     }
     else
     {
?>
          <td width="33%" align=center><b>BSP Level</b></td>
          <td width="33%" align=center><b>Last update</b></td>
          <td width="33%" align=center><b>Robot Firmware Version</b></td>
<?php
     }
?>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
<?php
     if( $ApolloVer == "" )
     {
?>
            <td width="50%" align=center><?= $productInfo->bsp_level ?> </td>
            <td width="50%" align=center><?= $productInfo->lastupdate ?> </td>
<?php
     }
     else
     {
?>
            <td width="33%" align=center><?= $productInfo->bsp_level ?> </td>
            <td width="33%" align=center><?= $productInfo->lastupdate ?> </td>
            <td width="33%" align=center><?= $ApolloVer ?> </td>
<?php
     }
?>
         </tr>
      </table>
    </td>
  </tr>
</table>


<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

<?php
if ($doEKM) 
{
?>

<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>Encryption</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="11%" align=center><b>Key Server Type</b></td>
          <td width="11%" align=center><b>Version</b></td>
          <td width="11%" align=center><b>SSL Connection</b></td>
          <td width="11%" align=center><b>Primary Host</b></td>
          <td width="11%" align=center><b>Primary Port</b></td>
          <td width="11%" align=center><b>Primary S/N</b></td>
          <td width="11%" align=center><b>Secondary Host</b></td>
          <td width="11%" align=center><b>Secondary Port</b></td>
          <td width="11%" align=center><b>Secondary S/N</b></td>
        </tr>
      </table>
    </td>
  </tr>


<?php
     if( $doSKM )
     {
?>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
          <td width="11%" align=center>SKM</td>
          <td width="11%" align=center><?=$qkmVer?></td>
          <td width="11%" align=center>Enabled</td>
          <td width="11%" align=center><?=$akm_data->primaryIP?></td>
          <td width="11%" align=center><?=$akm_data->primaryPort?></td>
          <td width="11%" align=center><?=$akmSNs->primarySN?></td>
          <td width="11%" align=center><?=$akm_data->secondaryIP?></td>
          <td width="11%" align=center><?=$akm_data->secondaryPort?></td>
          <td width="11%" align=center><?=$akmSNs->secondarySN?></td>
         </tr>
      </table>
    </td>
  </tr>
<?php
     }
     if( $doQEKM )
     {
?>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
          <td width="11%" align=center>Q-EKM</td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center><?=$sslEnabled?></td>
          <td width="11%" align=center><?=$ekm_data->primaryIP?></td>
          <td width="11%" align=center><?=$ekm_data->primaryPort?></td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center><?=$ekm_data->secondaryIP?></td>
          <td width="11%" align=center><?=$ekm_data->secondaryPort?></td>
          <td width="11%" align=center>N/A</td>
         </tr>
      </table>
    </td>
  </tr>
<?php
     }
     if( $doTKLM )
     {
?>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
          <td width="11%" align=center>TKLM</td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center><?=$sslEnabled?></td>
          <td width="11%" align=center><?=$tklm_data->primaryIP?></td>
          <td width="11%" align=center><?=$tklm_data->primaryPort?></td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center><?=$tklm_data->secondaryIP?></td>
          <td width="11%" align=center><?=$tklm_data->secondaryPort?></td>
          <td width="11%" align=center>N/A</td>
         </tr>
      </table>
    </td>
  </tr>
<?php
     }
     if( $doRKM )
     {
?>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
          <td width="11%" align=center>RKM</td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center>Enabled</td>
          <td width="11%" align=center><?=$rkm_data->primaryIP?></td>
          <td width="11%" align=center><?=$rkm_data->primaryPort?></td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center>N/A</td>
         </tr>
      </table>
    </td>
  </tr>
<?php
     }
     if( $doKMIP )
     {
?>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
         <tr>
          <td width="11%" align=center>KMIP</td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center>Enabled</td>
          <td width="11%" align=center><?=$kmip_data->primaryIP?></td>
          <td width="11%" align=center><?=$kmip_data->primaryPort?></td>
          <td width="11%" align=center>N/A</td>
          <td width="11%" align=center><?=$kmip_data->secondaryIP?></td>
          <td width="11%" align=center><?=$kmip_data->secondaryPort?></td>
          <td width="11%" align=center>N/A</td>
         </tr>
      </table>
    </td>
  </tr>
<?php
     }
?>
</table>

<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

<?php
} //if ($doEKM) 
?>

<? if($hasEDLM) { ?>

<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>EDLM StorNext Configurations</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="25%" align=center><b>Name</b></td>
          <td width="25%" align=center><b>Host</td>
          <td width="25%" align=center><b>Failover Host</td>
          <td width="25%" align=center><b>Plug-in</td>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
<? foreach($apps as $app) { ?>
         <tr>
            <td width="25%" align="center"><?= $app->name ?></td>
            <td width="25%" align="center"><?= $app->host ?>:<?= $app->port ?></td>
         <? if($app->failover_host != "") { ?>
            <td width="25%" align="center"><?= $app->failover_host ?>:<?= $app->failover_port ?></td>
         <? } else { ?>
            <td width="25%" align="center">Not Configured</td>
         <? } ?>
            <td width="25%" align="center"><?= $pluginMap[$app->action_type_id] ?></td>
         </tr>
<? } ?>
      </table>
    </td>
  </tr>
</table>

<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

<? } ?>

<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>Library Partitions</td>
   </tr>
</table>

<? 
$lib_col_widths = array(10, 17, 19, 8, 11, 8, 7, 7, 7, 6);
if($hasEDLM) { // If we need to include the EDLM column, specify new widths
   $lib_col_widths = array(9, 16, 18, 7, 10, 7, 6, 6, 6, 5, 10);
} 
?>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="<?= $lib_col_widths[0] ?>%" align="center"><b>Name</b></td>
          <td width="<?= $lib_col_widths[1] ?>%" align="center" nowrap="nowrap"><b>Serial Number</b></td>
          <td width="<?= $lib_col_widths[2] ?>%" align="center" nowrap="nowrap"><b>Control Path</b></td>
          <td width="<?= $lib_col_widths[3] ?>%" align="center"><b>Mode</b></td>
          <td width="<?= $lib_col_widths[4] ?>%" align="center"><b>Encryption</b></td>
          <td width="<?= $lib_col_widths[5] ?>%" align="center"><b>Type</b></td>
          <td width="<?= $lib_col_widths[6] ?>%" align="center"><b>Slots</b></td>
          <td width="<?= $lib_col_widths[7] ?>%" align="center"><b>Media</b></td>
          <td width="<?= $lib_col_widths[8] ?>%" align="center"><b>Drives</b></td>
          <td width="<?= $lib_col_widths[9] ?>%" align="center"><b>FIPS</b></td>
          <? if($hasEDLM) { ?>
          <td width="<?= $lib_col_widths[10] ?>%" align="center"><b>StorNext<br/>Config</b></td>
          <? } ?>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
<?php

// Load the Encyrption method for unassigned drives
$libraryEncryption["Physical Library"] = "N/A";


foreach ($libs as $lib) 
{
   $sortCriteria = new SortCriteria();
   $sortCriteria->filterColumn = 0;
   $sortCriteria->ascending = true;

   error_log("get_all_drives_by_library...");
   $libraryDrives = get_all_drives_by_library($user, $lib->guid, $sortCriteria, (int) 0, (int) MEDIA_TYPE_ANY);
   error_log("libraryDrives = " . print_r($libraryDrives,true) );

   error_log("get_ekm_by_library...");
   $ekm_data_lib = get_ekm_by_library( $user, $lib->guid );

    $commandPath = "None";
    $foundCommandPath = false;
    foreach ($libraryDrives as $libraryDrive) 
    {
        if( $libraryDrive->controlPathType != 0 ) // CP_NONE
        {
            error_log("Command Path Drive interface type is :". print_r($libraryDrive->interfaceType,true) );
            if ($libraryDrive->interfaceType == 'SCSI') 
            {
              $commandPath = "SCSI ID ".$libraryDrive->scsiId;
            } 
            else if ($libraryDrive->interfaceType == 'Fibre' && $libraryDrive->wwpn) 
            {
                switch($libraryDrive->controlPathType)
                {
                case 1:    // CP_LUN1
                    $wwpn = $libraryDrive->wwpn;
                    break;
                case 2:    // CP_CPF_ACTIVE
                    $wwpn = $libraryDrive->virtual_wwpn;
                    break;
                case 3:    // CP_CPF_INACTIVE
                    $wwpn = $libraryDrive->virtual_wwpn;
                    break;
                }

                $commandPath = "WWPN ".$wwpn;
            }
            else if ($libraryDrive->interfaceType == 'SAS' && $libraryDrive->wwpn)
            {
                 # PCR 20172: Remove colon from SAS Address
                 # PCR 20176: Show wwpn instead of wwnn, and change the label to "SAS Address"
              $saswwpn = str_replace(":", "", $libraryDrive->wwpn);
              $commandPath = "SAS Address<br>".$saswwpn;
            }
            $foundCommandPath = true;
            break;
        }
        if ($foundCommandPath) 
            break;
   }
    
   if ($foundCommandPath == false)
   {
        // If we still have not found a control path and there is a blade in the system - then make the Cp the blade.
        if( sizeof($iobs) != 0 )
        {
           // Has BLADES
            $commandPath = "FC I/O Blade";
        }
   }
    
   // Get the currents library's encryption status
   error_log("Guid:".$lib->guid);
   $EncryptionMethod = array( "N/A", "None", "System Managed", "Application Managed", "Library Managed", "Custom" );
   $edlmEncryptionMethod = array( "N/A", "None", "System Managed", "None", "Library Managed", "Custom" );
   error_log("get_partition_enryption...");
   $encryptData = get_partition_enryption($user, $lib->guid);

    // Make sure the method is valid - if not make it N/A
    if( $encryptData->method > sizeof($EncryptionMethod))
      $encryptData->method = 0;

    // Check that encryption is supported by the partition.  if not,
    // show the method as "unsupported".
    error_log("GetEncryptionSupported...");
    if(!GetEncryptionSupported($libraryDrives))
    {
        $encryptionString = "Unsupported";
        $encryptData->method = 0;
    }
    else 
        $encryptionString = $lib->libraryManaged ? $edlmEncryptionMethod[$encryptData->method] : $EncryptionMethod[$encryptData->method];

    // Make sure the method is valid - if not make it N/A
    if( $encryptData->method > sizeof($EncryptionMethod))
      $encryptData->method = 0;

    // PCR 23228 States the drive should show there encryption type not the paritions.
    // Note: This array is used below to display the encryption methods for the drives.
    //$libraryEncryption[$lib->name] = $EncryptionMethod[$encryptData->method];

    
    $ekm_data_lib = get_ekm_by_library( $user, $lib->guid );
    error_log("get_ekm_by_library...". print_r($ekm_data_lib, true));

    /*##############################################################################################
     # PCR 33871
     # That behavior is correct in i7.2.  The UDS subsystem now forces all partitions to use the 
     # same server type setting.  If a partition doesn't support encryption (or isn't set to LME), 
     # you should show the server type as "N/A". 
     ###############################################################################################  
    */
    if( $encryptData->method == 4 )
    {
        if ($ekm_data_lib->serverType==1)
        {
            $encryptionType = "Q-EKM"; 
        }
        else if ($ekm_data_lib->serverType==2)
        {
            $encryptionType = "SKM"; 
        }
        else if ($ekm_data_lib->serverType==3)
        {
            $encryptionType = "RKM"; 
        }
        else if ($ekm_data_lib->serverType==4)
        {
            $encryptionType = "KMIP KM"; 
        }
        else
        {
            $encryptionType = "N/A"; 
        }    
    }
    else
    {
       $encryptionType = "N/A"; 
    }    

    
?>
   <tr>
      <td width="<?= $lib_col_widths[0] ?>%" align=center><?= $lib->name ?></td>
      <td width="<?= $lib_col_widths[1] ?>%" align=center><?= $lib->serialNumber ?>&nbsp;</td>
      <td width="<?= $lib_col_widths[2] ?>%" align=center nowrap="nowrap"><?= $commandPath ?>&nbsp;</td>
      <td width="<?= $lib_col_widths[3] ?>%" align=center><?= $lib->libraryManaged ? "N/A" : $lib->status ?></td>
      <td width="<?= $lib_col_widths[4] ?>%" align=center><?= $encryptionString ?></td>
      <td width="<?= $lib_col_widths[5] ?>%" align=center nowrap><?=$ekmServerDefault==""?$encryptionType:$ekmServerDefault?></td>
      <td width="<?= $lib_col_widths[6] ?>%"  align=center><?= $lib->totalSlots ?></td>
      <td width="<?= $lib_col_widths[7] ?>%" align=center><?= $lib->totalMedia ?></td>
      <td width="<?= $lib_col_widths[8] ?>%" align=center><?= $lib->totalDrives ?></td>
      <td width="<?= $lib_col_widths[9] ?>%" align=center><?= $lib->fipsEnabled?"Yes":"no" ?></td>
      <? if($hasEDLM) { ?>
      <td width="<?= $lib_col_widths[10] ?>%" align=center><?= $lib->edlm_policy->action_id ? $appMap[$lib->edlm_policy->action_id] : "None" ?></td>
      <? } ?>
   </tr>
<?php
}
?>
      </table>
    </td>
  </tr>
</table>

<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>Drives</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
        <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0 border="0">
        <tr>
            <td width="8%" align=center><b>Location</b></td>
            <td width="8%" align=center><b>Vendor</b></td>
            <td width="12%" align=center><b>Model</b></td>
            <td width="8%" align=center><b>Type</b></td>
            <td width="14%" align=center><b>Serial Number</b></td>
            <td width="10%" align=center><b>Firmware Level</b></td>
            <td width="10%" align=center><b>Sled Boot Version</b></td>
            <td width="10%" align=center><b>Sled App Version</b></td>
            <td width="10%" align=center><b>Encryption</b></td>
            <td width="10%" align=center><b>FC I/O Blade<br>connected</b></td>
        </tr>
        </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
<?php

foreach ($drives as $drive) 
{
    error_log("is_blade_connected...");
    $usesBlade = is_blade_connected( $user, $drive->guid );

    error_log("drive->encryptionSupported = ". ($drive->encryptionSupported?"true":"false") ." | Location = ". $drive->location ); 
    
    if( ($drive->encryptionSupported) && ($drive->driveType >= 'LTO-4') && ($drive->vendor == 'IBM') )
    {
        //error_log("\n\nDriveName = ". $drive->name ." !");
        //pcr 23228 $driveEncryption = $libraryEncryption[$drive->name];
        $driveEncryption = $EncryptionMethod[$drive->encryptionMethod];
        $encryptionType = "Q-EKM";
    }
    else if( ($drive->encryptionSupported) && ($drive->driveType >= 'LTO-4') && ($drive->vendor == 'HP') )
    {
        //error_log("\n\nDriveName = ". $drive->name ." !");
        //pcr 23228 $driveEncryption = $libraryEncryption[$drive->name];
        $driveEncryption = $EncryptionMethod[$drive->encryptionMethod];
        $encryptionType = "SKM";
    }
    else
    {
        $driveEncryption = "N/A";
        $encryptionType = "N/A";
    }

    if($driveEncryption == $EncryptionMethod[3] && $drive->isEDLM)
    {
       $driveEncryption = "None";
    }

?>
         <tr>
             <td width="8%" align=center><?= $drive->location ?></td>
             <td width="8%" align=center><?= $drive->vendor ?></td>
             <td width="12%" align=center><?= $drive->model ?></td>
             <td width="8%" align=center><?= $drive->driveType ?></td>
             <td width="14%" align=center nowrap title="The Physical and Logical Serial Numbers.">
                <table border="0" cellpadding="0" cellspacing="0">
                    <tr><td align="center" nowrap>
                        <font size="-2">P-SN:</font> <?= $drive->serialNumber ?>
                    </td></tr><td align="center" nowrap>
                        <font size="-2">L-SN:</font> <?= $drive->logicalSerialNumber ?>
                    </td></tr>    
                </table>
             </td>
             <td width="10%" align=center><?= $drive->firmwareLevel ?></td>
             <td width="10%" align=center><?= $drive->sledBootVersion ?></td>
             <td width="10%" align=center><?= $drive->sledAppVersion ?></td>
             <td width="10%" align=center><?= $driveEncryption ?></td>
             <td width="10%" align=center><?= $usesBlade?Yes:No ?></td>
         </tr>
<?php
}
?>
      </table>
    </td>
  </tr>
</table>
<br>
<?php

if( sizeof($iobs) == 0 && ! $is5U )
{

?>
<table width="90%" class="mediaTableOuter" align="center" border="0">
   <tr>
   <td align="center" nowrap>
      No FC I/O Blades detected.
   </td>
   </tr>
</table>
<br>
   
<?php

}
else if( sizeof($iobs) > 0 )
{

?>
<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>FC I/O Blades</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="10%" align=center><b>Location</b></td>
          <td width="30%" align=center><b>WWNN</b></td>
          <td width="30%" align=center><b>Firmware level</b></td>
          <td width="30%" align=center><b>Status</b></td>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
<?php
foreach ($iobs as $iob) 
{
?>
         <tr>
             <td width="10%" align=center><?= $iob->location ?></td>
             <td width="30%" align=center><?= $iob->wwnn ?></td>
             <td width="30%" align=center><?= $iob->fw_ver ?></td>
             <td width="30%" align=center><?= $IOB_bladeStatus[$iob->status] ?></td>
         </tr>
<?php
}
?>
      </table>
    </td>
  </tr>
</table>
<?php

}

?>


<br>


<?php

if( sizeof($eebs) > 0 )
{

?>
<table width=95% align=center>
   <tr>
      <td class="subHeading" align=left>EE Blades</td>
   </tr>
</table>

<table class=noWidthTableHeading align=center width=90% cellpadding=3 cellspacing=0>
  <tr>
    <td>
      <table class=reportMenuItems3 align=center width=100% cellpadding=3 cellspacing=0>
        <tr>
          <td width="50%" align=center><b>Location</b></td>
<!--          <td width="30%" align=center><b>WWNN</b></td>
          <td width="30%" align=center><b>Firmware level</b></td>
-->
          <td width="50%" align=center><b>Status</b></td>
        </tr>
      </table>
    </td>
  </tr>
  <tr>
    <td>
      <table class=menudata align=center width=100% cellpadding=3 cellspacing=0 border=1>
<?php
foreach ($eebs as $eeb) 
{
?>
         <tr>
             <td width="50%" align=center><?= $eeb->location ?></td>
<!--             <td width="30%" align=center><?= $eeb->wwnn ?></td>
             <td width="30%" align=center><?= $eeb->fw_ver ?></td>
-->
             <td width="50%" align=center><?= $IOB_bladeStatus[$eeb->status] ?></td>
         </tr>
<?php
}
?>
      </table>
    </td>
  </tr>
</table>
<?php

}

?>


<table width=95% align=center>
  <tr>
    <td>&nbsp;</td>
  </tr>
</table>

</body>
</html>