Ethernet Expansion Blade Control

Enclosure selected

Screen Element	Description
	Click to refresh the contents of the screen.
Select an enclosure	Choose the enclosure. The default is All Enclosures.

Ethernet Expansion Blades:

Screen Element	Description
—Select Action—	After selecting the EE blade(s), click on ▼ and select one of the following actions: Power Cycle - power cycles the selcted Ethernet Expansion blade(s). It takes approximately 1 minute to power cycle an Ethernet Expansion blade. The status displays as "Booting" during the power cycle. Power On - powers on the selcted Ethernet Expansion blade(s). Power Off - powers off the selcted Ethernet Expansion blade(s). Remove - permanently removes or relocates the selected Ethernet Expansion blade(s) within the library (You do not need to do this if you are replacing an Ethernet Expansion blade in the same location). Then remove the Ethernet Expansion blade from its slot. Select All - selects all Ethernet Expansion blades in the table or click Deselect All - deselects all selected Ethernet Expansion blades in the table or click
	Click this button to perform the specified action.
Select	To select an Ethernet Expansion blade, click on the box or double-click on the table row.
Location	The location of an Ethernet Expansion blade.
ID	The ID of an Ethernet Expansion blade.
Serial	The serial number of an Ethernet Expansion blade.
WWNN	This is the World Wide Node Name (WWNN) of an Ethernet Expansion blade.
Firmware Version	The firmware version of an Ethernet Expansion blade.
Status	The status of an Ethernet Expansion blade.