| –Select Action– |
Click on ▼ and select one of the following:- Update Firmware
- --Table Actions-- - not selectable
- Select All - to select all data cartridges in the table or click
- Deselect All - to deselect all selected data cartridges in the table or
click
|
 |
After selecting an action, click this button to execute
the selected action. |
| Select |
Click on the box or click the table row to select/deselect
a data cartridge. To sort the items, click on ^. |
| Location |
The location of the drive in the library. The first
digit identifies the unit in the library. The second digit identifies the
slot within the unit in the library. |
| Serial Number |
The serial number of the drive. |
| Logical Library |
This identifies the logical library to which the drive
is associated. |
| Type |
This is the type (or generation) of the drive. |
| Interface |
The type of drive. Valid drive types
are SAS, SCSI, or Fibre Channel. |
| Element Address |
This is the SCSI element address of the drive. |
| Firmware Level |
This is the level of firmware currently on the drive. |
| Status |
This is the current status of the drive. |
| Ethernet Connected |
If the tape drive is connected via Ethernet, the tape drive IP
address will be listed in the column. If the tape drive is Ethernet capable but not connected, the column displays “No.”
If the tape drive is not Ethernet Capable, the column displays “N/A.” |
| Total |
The total number of drives. |
| Filtered |
The number of drives filtered from the total. |
| Displayed |
The remaining number of drives (Total - Filtered). |
| Selected |
The number of drives currently selected. |
