## This file describes the IBM BRANDING lookup map used to define
## string label displayed on the local UI.

PRODUCT_NAME "TS3310"
partition.58 "Could not get minimum partition count"
partition.57 "Logical Library Information"
partition.56 "Select the logical library:\n"
partition.54 "Deleting logical library"
partition.53 "When you delete a logical library, all drives, media and slots will be unassigned. You will need to create a new logical library to use these resources.\n Are you sure you want to delete "
partition.52 "Unload all drives in the logical library before deleting it."
partition.51 "Delete logical library"
partition.50 "Logical Library Access"
barcode.5 "Location (if volume serial unknown):"
barcode.4 "If you know the volume serial of the media, enter it below. You can use * as a wildcard. Or, you can view media based on where it is located in the library."
barcode.3 "Vol Ser:"
barcode.2 "Volume Serial"
partition.49 "There are currently no resources available to create logical libraries. You must delete one or more existing logical libraries to free up resources before you can create any more Logical Libraries."
partition.48 "Create Logical Libraries Error"
partition.47 "Logical Lib:"
partition.46 "Creating Logical Libraries"
partition.45 "Requested Logical Libraries must have unique names."
partition.44 "Logical library name already exists: "
partition.43 "\nlogical library name should contain only underscores and alpha-numeric characters."
partition.42 "Invalid logical library name: "
partition.41 "Logical library names should be at least one character"
partition.40 "The following logical libraries will be created. You can modify the logical library name."
ie.11 "Could not configure I/O Station settings"
ie.10 "Could not get the number of I/O choices"
partition.39 "Partitioning Confirmation"
partition.38 "Automatic partitioning assigns library resources proportionally among the logical libraries, see online help for more information.\nSelect the number of logical libraries you would like to create:\n"
partition.37 "Logical Library Name:"
partition.36 "Select assignment for cartridges just inserted."
partition.35 "You need to select one of the logical libraries"
partition.33 "storage slot. The logical library will be taken offline "
partition.9 "Failed to get logical libraries"
partition.32 "while it is performing the move.\n\n Select a logical library:"
partition.31 "The logical library will be taken offline to perform this operation. Would you like to continue?"
partition.7 "  Get all logical libraries" 
partition.6 "Could not get logical libraries"
partition.5 "Could not create logical libraries"
partition.4 "Could not get max logical library count"
partition.3 "Logical Libs:"
partition.2 "Select a logical library:"
mailbox.30 "Before continuing this operation, make sure the FMR tape is placed in the top I/O Station slot, scanned and assigned for system use. Then press 'Apply' to continue."
partition.1 "Logical library%d%d%d"
mailbox.9 "Could not get current I/O Station slot count"
mailbox.8 "No empty I/O Station slots available."
mailbox.7 "Setup I/O Station Slots"
mailbox.6 "I/O Station Operations"
mailbox.5 "I/O Station"
mailbox.4 "Number of occupied I/O Station slots: "
mailbox.3 "Number of I/O Station slots: "
mailbox.2 "I/O Station Slots:"
mailbox.1 "Insert allows you to add one or more pieces of media from the I/O Station into a logical library."
partition.29 "\n\n Select a logical library:"
partition.28 "The logical library will be taken offline during the load operation. "
partition.27 "No empty slots available in this logical library"
partition.26 "Remove allows you to remove one or more pieces of media from a logical library to the I/O Station.\n\nSelect the source logical library\n"
partition.25 "Logical library 6"
mailbox.29 "Before continuing this operation, make sure that a scratch tape is placed in the top I/O Station slot, scanned and assigned for system use. Then press 'Apply' to continue."
partition.24 "Logical library 5"
mailbox.28 "The top I/O Station location is empty, please place the tape in the top I/O Station location"
partition.23 "Logical library 4"
mailbox.27 "Setup Wizard: I/O Station"
partition.22 "Logical library 3"
mailbox.26 "An I/O Station is a designated set of slots that you can use to put media in and out of the library without disrupting normal library operations. I/O Station slots cannot be used for storage. \n\n Do you want to configure I/O Station slots?"
partition.21 "Logical library 2"
mailbox.25 "Choose the number of I/O Station (import/export) slots for the library:"
partition.20 "Select the logical library that contains the drive you would like to clean:"
mailbox.24 "Setup Wizard: I/O Station Slots"
mailbox.23 "Shared I/O Station Slots:"
mailbox.21 "Setting I/O Station Size"
mailbox.20 "Choose the number of I/O Station slots for the library:"
partition.19 "Select a mode for the logical library:"
partition.18 "Modify Logical Libraries"
partition.17 "Create Logical Libraries"
partition.16 "Change logical library Mode"
partition.15 "Log. Lib."
mailbox.19 "I/O Station Slots"
partition.14 "No logical libraries configured on this library"
mailbox.18 "Unload drive allows you to unload media from a drive to it's storage slot."
partition.13 "Logical library 1"
partition.12 "Max logical libraries allowed:   "
mailbox.17 "Move media allows you to move a single piece of media between drives, I/O Station, and storage slots.\n\nSelect a logical library: "
partition.11 "Current logical library count:  "
partition.10 "  Get all logical library info"
mailbox.15 "Select the I/O Station door state (Note this will apply to the I/O Station slots in all modules of the library):"
mailbox.14 "Lock/Unlock I/O Station"
partition.73 "Select a logical library to view information about the drives within the logical library."
ras.5 "Failed to get Operator Interventions Management Interface"
mailbox.13 "Could not get I/O Station slot"
partition.72 "Setup Logical Libraries"
ras.4 "Could not get Operator Interventions element"
mailbox.12 "Load drive allows you to load media from a storage slot to a drive. "
partition.71 "Setup Wizard: Partitioning"
ras.3 "Could not get Operator Interventions management interface."
mailbox.11 "Insert allows you to add one or more pieces of media from the I/O Station into a logical library.\n\nSelect a logical library:"
action_request.8 "No open Operator Interventions were found for sub-system selected."
action_request.7 "Media Operator Interventions"
partition.70 "Partitioning is a way of dividing up the resources in the library so that a single library can be accessed by many hosts. The number of logical libraries you can create is limited by the number of drives in your library. You can divide your library into as many logical libraries as the number of drives installed. \n\nDo you want to reconfigure logical libraries?"
ras.2 "Could not get Operator Interventions management interface"
mailbox.10 "The number of media selected %d, is greater than the empty I/O Station slots available %d."
action_request.6 "Drives Operator Interventions"
ras.1 "Failed to get Operator Interventions management interface"
action_request.5 "All Open Operator Interventions"
action_request.4 "Operator Interventions"
action_request.3 "Library Operator Interventions"
action_request.2 "Operator Intervention Details"
action_request.1 "No open Operator Interventions were found."
partition.69 "Setup Wizard: Partitioning Confirmation"
partition.68 "Delete Logical Libraries"
partition.67 "Setup Wizard: Automatic Partitioning"
ie.4 "Assign I/O "
partition.66 "You must select at least one logical library."
ie.3 "Lock/Unlock I/O Station"
partition.65 "Select logical library Access"
ie.2 "There is no cleaning media assigned to the 'system' partition."
ie.1 "No empty I/O Station slots available."
partition.63 "There are no logical libraries currently configured on the library, you must have at least one logical library configured to perform this operation."
ras.12 "  Operator Intervention info"
partition.62 "Choose the logical libraries this user has access to:"
partition.61 "TestMelogical library"
partition.60 "Modify/Delete logical library"
partition.59 "You can delete one logical library at a time. \n\nSelect a logical library to delete:"
capture_snapshot.4 "To be able to Email Current Logs, the e-mail configuration must be set up.  The e-mail configuration can be set up using the web UI."
capture_snapshot.3 "Email Current Logs gathers log files from the library.\n\nEnter the e-mail address for where you want to send logs:"
capture_snapshot.2 "Could not Email Current Logs"
capture_snapshot.1 "Email Current Logs"
partition.80 "No logical libraries are configured, or logical library access not defined for current user."
partition.81 "Drive IDs logical library"
partition.82 "Select a logical library to assign the drive IDs to drives within the logical library."
partition.83 "No SCSI Drives configured in this logical library"
partition.84 "No Fibre Drives configured in this logical library"
partition.85 "All Fibre Drives are currently OFFLINE in this logical library.  To change drive id's, the drive must be ONLINE."
partition.86 "All SCSI Drives are currently OFFLINE in this logical library.  To change drive id's, the drive must be ONLINE."
partition.87 "Select a logical library to assign the drive control path for that logical library."
partition.88 "Drive Control Path"
driveInfoCaption.1 "Drive Information logical library"
control_path_change_confirm.1 "Before making the change, please make sure the current control path is not in use. Any software configured to use the current control path will need to be reconfigured to use the new control path."
setup_mail_box_partition.1 "To configure I/O slots, there must be no media in the I/O Station. You must remove any media in the I/O Station in order to reconfigure I/O slots."
assign_IE.1 "Assign I/O"
ieStation.1 "I/O Station is empty."
ieStationMediaNotAssigned.1 "No Media in I/O Station are assigned to any logical library."
partitionOfflineMessage.1 "CAUTION: This request will take the selected logical library offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
partitionOfflineMessage.3 "CAUTION: This request will take the logical library offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
driveOfflineMessage.1 "CAUTION: This request will take the selected data transfer element offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
networkConfigurationMessage.1 "CAUTION: This request will modify network connectivity parameters and requires remote communication interfaces to be reconfigured.\n\nSelect "Apply" to perform the operation."
partitionOfflineMessage.2 "CAUTION: This request will take the selected logical libraries offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
driveOfflineMessage.2 "CAUTION: This request will take the selected data transfer elements offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
upgradeFirmwareCaution.1 "\n\nCAUTION: This request will take the selected logical library that owns the drive(s) offline and limit successful host communication."
partitionDeleteMessage.1 "CAUTION: Some of the drives in this logical library are loaded with media. It is highly recommended that you unload these drive(s) before deleting the logical library.\n\nSelect "Apply" to perform the operation."
driveOfflineMessage.3 "CAUTION: This request will take the selected data transfer element(s) offline and limit successful host communication. Please, make sure that Control Path is not in use.\n\nSelect "Apply" to perform the operation."
mailbox.32 "Before continuing this operation, make sure the Cleaning tape is placed in the top I/O Station slot, scanned and assigned for system use. Then press 'Apply' to continue."
mailbox.33 "CAUTION: Configurations without I/O Station support will not allow operations that require I/O elements. You must also remove all media from I/O Station(s) before you change the current configuration.\n\nSelect "Apply" to perform the operation."
mailbox.34 "This operation cannot be performed since the required I/O Station support is not configured."
mailbox.35 "This selection will unlock the I/O Station(s). Make sure the I/O Station(s) are currently not accessed by the robot."
mailbox.36 "All I/O Station slots are currently configured as storage. Use lock/unlock to allow access to the CM module."
mailbox.37 "CAUTION: Configurations without I/O Station support will not allow operations that require I/O elements."
importMedia.1 "Insert Media"
importCleaningMedia.1 "Insert Cleaning Media"
exportMedia.1 "Remove Media"
exportCleaningMedia.1 "Remove Cleaning Media"
importMedia.2 "insert"
exportMedia.2 "remove"
mailboxCaution.1 "CAUTION: You must remove all media from I/O Station(s) before you change the current configuration.\n\nSelect "Apply" to perform the operation."
mailboxCaution.2 "CAUTION: You must remove all media from I/O Station(s) before you change the current configuration."
mailboxCaution.3 "CAUTION: Configurations without I/O Station support will not allow operations that require I/O elements. You must also remove all media from I/O Station(s) before you change the current configuration."

driveMgmtOptions.1 "Create an FMR tape"
driveMgmtOptions.2 "Update drive firmware using FMR"
driveMgmtOptions.3 "Erase an FMR tape"
driveMgmtOptions.4 "Clean drive"
driveMgmtOptions.5 "Reset drives"
updateDriveFirmwareCaption.1 "Update Drive Firmware using FMR"
createFirmwareTapeCaption.1 "Create an FMR Tape"
eraseFirmwareTapeCaption.1 "Erase an FMR tape"
createFirmwareTapeAction.1 "Select the drive to create an FMR tape from:"
eraseFirmwareTapeAction.1 "Select the drive to perform erase of FMR tape:"

partitionManagement "Logical Library Management"
partitionManagementCreate "Create Logical Library"
partitionManagementDelete "Delete Logical Library"
partitionManagementIEslots "Configure I/O Station Slots"
partitionManagementCleaningslots "Configure Cleaning Slots"
partitionManagementDeleteAll "Delete all Logical Libraries"
deleteAllPartitions "CAUTION: After deleting all logical libraries, all library resources (drives, media and slots) become unassigned. You must create at least one logical library to use these resources.\n\nSelect "Apply" to delete all logical libraries."

rmiReconnectMessage "The Op Panel has lost communication with the library server and is currently trying to reconnect. If the connection continues to fail, the library should be rebooted."
chooseLocalOrRemoteSetup "You can finish setting up your library on this Op Panel or on a remote computer using a Web browser. It is recommended that you set up remotely as there are more options available. (NOTE: To use the remote interface, you will need to install the Host Ethernet cable, and cancel this setup)."
ivtLibraryOffline "CAUTION: This operation will take all Logical Libraries offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
ivtScratchNeededLibraryOffline "CAUTION: This operation will take all Logical Libraries offline and limit successful host communication.\n\nBefore continuing this operation, make sure that a scratch tape is placed in the top I/O Station slot, scanned and assigned for system use.\n\nSelect "Apply" to perform the operation."

CommandHistoryLogViewLogWarning.1 "E-mail configuration must be set up. The e-mail configuration can be set up using the web UI."
IvtEmailLogWarning.1 "To be able to e-mail logs, the e-mail configuration must be set up. The e-mail configuration can be set up using the web UI."
ivtNotSupportedMsg "Your library does not support the IVT selection as it was built prior to July 01, 2008. Please refer to the user's guide for more details."
ivtString "IVT"
