## This file describes the TANDBERG BRANDING lookup map used to define
## string label displayed on the local UI.

PRODUCT_NAME "T128"
partition.58 "Could not get minimum partition count"
partition.57 "Partition Information"
partition.56 "Select the partition:\n"
partition.55 "Partition Access:"
partition.54 "Deleting Partition"
partition.53 "When you delete a partition, all drives, media and slots will be unassigned. You will need to create a new partition to use these resources.\n Are you sure you want to delete "
partition.52 "Unload all drives in the partition before deleting it."
partition.51 "Delete Partition"
partition.50 "Partition Access"
barcode.5 "Location (if barcode unknown):"
barcode.4 "If you know the barcode of the media, enter it below. You can use * as a wildcard. Or, you can view media based on where it is located in the library."
barcode.3 "Barcode:"
barcode.2 "Barcode"
partition.49 "There are currently no resources available to create partitions. You must delete one or more existing partitions to free up resources before you can create any more partitions."
partition.48 "Create Partitions Error"
partition.47 "Partition:"
partition.46 "Creating Partitions"
partition.45 "Requested partitions must have unique names."
partition.44 "Partition name already exists: "
partition.43 "\nPartition name should contain only underscores and alpha-numeric characters."
partition.42 "Invalid partition name: "
partition.41 "Partition names should be at least one character"
ie.11 "Could not configure I/E Station settings"
partition.40 "The following partitions will be created. You can modify the partition name."
ie.10 "Could not get the number of I/E choices"
capture_snapshot.4 "To use the Capture Snapshot, the e-mail configuration must be set up.  The e-mail configuration can be set up using the web client."
capture_snapshot.3 "Capture Snapshot gathers log files from the library.\n\nEnter the e-mail address for where you want to send the snapshot:"
capture_snapshot.2 "Could not email capture snapshot"
capture_snapshot.1 "Capture Snapshot"
partition.39 "Partitioning Confirmation"
partition.38 "Automatic partitioning assigns library resources proportionally among the partitions, grouping drives according to their interface types.\nSelect the number of partitions you would like to create:\n"
partition.37 "Partition Name:"
partition.36 "Select assignment for cartridges just inserted."
partition.35 "You need to select one of the partitions"
partition.33 "storage slot. The library/partition will be taken offline "
partition.9 "Failed to get partitions"
partition.32 "while it is performing the move.\n\n Select a library/partition:"
partition.8 "Partition name:     "
partition.31 "The partition will be taken offline to perform this operation. Would you like to continue?"
partition.7 "  Get all partitions"
partition.6 "Could not get partitions"
partition.5 "Could not create partitions"
partition.4 "Could not get max partition count"
partition.3 "Partitions:"
partition.2 "Select a library/partition:"
mailbox.30 "Before continuing this operation, make sure the firmware tape is placed in the top I/E Station slot, scanned and assigned for system use. Then press 'Apply' to continue."
partition.1 "Partition%d%d%d"
mailbox.9 "Could not get current I/E Station slot count"
mailbox.8 "No empty I/E Station slots available."
mailbox.7 "Setup I/E Station Slots"
mailbox.6 "I/E Station Operations"
mailbox.5 "I/E Station"
mailbox.4 "Number of occupied I/E Station slots: "
mailbox.3 "Number of I/E Station slots: "
mailbox.2 "I/E Station Slots:"
mailbox.1 "Import allows you to import one or more pieces of media from the I/E Station into a partition."
partition.29 "\n\nSelect a partition:"
partition.28 "The library/partition will be taken offline during the load operation. "
partition.27 "No empty slots available in this partition"
partition.26 "Export allows you to export one or more pieces of media from a partition to the I/E Station.\n\nSelect the source partition:\n"
partition.25 "Partition 6"
mailbox.29 "Before continuing this operation, make sure the scratch tape is placed in the top I/E Station slot, scanned and assigned for system use. Then press 'Apply' to continue."
partition.24 "Partition 5"
mailbox.28 "The top I/E Station location is empty, please place the tape in the top I/E Station location"
partition.23 "Partition 4"
mailbox.27 "Setup Wizard: I/E Station"
partition.22 "Partition 3"
mailbox.26 "An I/E Station is a designated set of slots that you can use to put media in and out of the library without disrupting normal library operations. I/E Station slots cannot be used for storage. \n\n Do you want to configure I/E Station slots?"
partition.21 "Partition 2"
mailbox.25 "Choose the number of I/E Station (import/export) slots for the library:"
partition.20 "Select the partition that contains the drive you would like to clean:"
mailbox.24 "Setup Wizard: I/E Station Slots"
mailbox.23 "Shared I/E Station Slots:"
mailbox.21 "Setting I/E Station Size"
mailbox.20 "Choose the number of I/E Station slots for the library:"
partition.19 "Select a mode for the partition:"
partition.18 "Modify Partitions"
partition.17 "Create Partitions"
partition.16 "Change Partition Mode"
partition.15 "Partition"
partition.14 "No Partitions configured on this library"
mailbox.19 "I/E Station Slots"
partition.13 "Partition 1"
mailbox.18 "Unload drive allows you to unload media from a drive to it's storage slot."
mailbox.17 "Move media allows you to move a single piece of media between drives, I/E Station, and storage slots.\n\nSelect a partition: "
partition.12 "Max partitions allowed:   "
partition.11 "Current partition count:  "
mailbox.15 "Select the I/E Station door state (Note this will apply to the I/E Station slots in all modules of the library):"
partition.10 "  Get all partition info"
mailbox.14 "Lock/Unlock I/E Station"
mailbox.13 "Could not get I/E Station slot"
ras.5 "Failed to get RAS Management Interface"
partition.73 "Select a Partition to view information about the drives within the Partitions."
mailbox.12 "Load drive allows you to load media from a storage slot to a drive. "
ras.4 "Could not get RAS element"
partition.72 "Setup Partitions"
mailbox.11 "Import allows you to import one or more pieces of media from the I/E Station into a partition.\n\nSelect a partition:"
ras.3 "Could not get RAS management interface."
partition.71 "Setup Wizard: Partitioning"
mailbox.10 "The number of media selected %d, is greater than the empty I/E Station slots available %d."
ras.2 "Could not get RAS management interface"
partition.70 "Partitioning is a way of dividing up the resources in the library so that a single library can be accessed by many hosts. The number of partitions you can create is limited by the number of drives in your library. You can divide your library into as many partitions as the number of drives installed. \n\nDo you want to reconfigure partitions?"
action_request.8 "No open RAS Tickets were found for sub-system selected."
action_request.7 "Media RAS Tickets"
ras.1 "Failed to get RAS management interface"
action_request.6 "Drives RAS Tickets"
action_request.5 "All Open RAS Tickets"
action_request.4 "RAS Tickets"
action_request.3 "Library RAS Tickets"
action_request.2 "RAS Ticket Details"
action_request.1 "No open RAS Tickets were found."
partition.69 "Setup Wizard: Partitioning Confirmation"
partition.68 "Delete Partitions"
ie.4 "Assign I/E "
partition.67 "Setup Wizard: Automatic Partitioning"
ie.3 "Lock/Unlock I/E Station"
partition.66 "You must select at least one partition."
ie.2 "You must assign cleaning media to the physical library."
partition.65 "Select Partition Access"
ie.1 "No empty I/E Station slots available."
ras.12 "  RAS Ticket info"
partition.63 "There are no partitions currently configured on the library, you must have at least one partition configured to perform this operation."
partition.62 "Choose the partitions this user has access to:"
partition.61 "TestMePartition"
partition.60 "Modify/Delete Partition"
partition.59 "You can delete one partition at a time. \n\nSelect a partition to delete:"
partition.80 "No partitions are configured, or partition access not defined for current user."
partition.81 "Drive IDs Partition"
partition.82 "Select a partition to assign the drive IDs to drives within the partition."
partition.83 "No SCSI Drives configured in this partition"
partition.84 "No Fibre Drives configured in this partition"
partition.85 "All Fibre Drives are currently OFFLINE in this partition.  To change drive id's, the drive must be ONLINE."
partition.86 "All SCSI Drives are currently OFFLINE in this partition.  To change drive id's, the drive must be ONLINE."
partition.87 "Select a partition to assign the drive control path for that partition."
partition.88 "Drive Control Path"
driveInfoCaption.1 "Drive Information Partition"
control_path_change_confirm.1 "Before making the change, please make sure the current control path is not in use. Any software configured to use the current control path will need to be reconfigured to use the new control path."
setup_mail_box_partition.1 "To configure I/E slots, there must be no media in the I/E Station. You must remove any media in the I/E Station in order to reconfigure I/E slots."
assign_IE.1 "Assign IE"
ieStationMediaNotAssigned.1 "No Media available in I/E Station are assigned to any partition"
partitionOfflineMessage.1 "CAUTION: This request will take the selected partition offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
partitionOfflineMessage.3 "CAUTION: This request will take the partition offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
driveOfflineMessage.1 "CAUTION: This request will take the selected data transfer element offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
networkConfigurationMessage.1 "CAUTION: This request will modify network connectivity parameters and requires remote communication interfaces to be reconfigured.\n\nSelect "Apply" to perform the operation."
partitionOfflineMessage.2 "CAUTION: This request will take the selected partitions offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
driveOfflineMessage.2 "CAUTION: This request will take the selected data transfer elements offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
upgradeFirmwareCaution.1 "\n\nCAUTION: This request will take the partition that owns the drive(s) offline and limit successful host communication."
partitionDeleteMessage.1 "CAUTION: Some of the drives in this partition are loaded with media. It is highly recommended that you unload these drive(s) before deleting the partition.\n\nSelect "Apply" to perform the operation."
driveOfflineMessage.3 "CAUTION: This request will take the selected data transfer element(s) offline and limit successful host communication. Please, make sure that Control Path is not in use.\n\nSelect "Apply" to perform the operation."
mailbox.32 "Before continuing this operation, make sure the Cleaning tape is placed in the top I/E Station slot, scanned and assigned for system use. Then press 'Apply' to continue."
mailbox.33 "CAUTION: Configurations without I/E Station support will not allow operations that require I/E elements. You must also remove all media from I/E Station(s) before you change the current configuration.\n\nSelect "Apply" to perform the operation."
mailbox.34 "This operation cannot be performed since the required I/E Station support is not configured."
mailbox.35 "This selection will unlock the I/E Station(s). Make sure the I/E Station(s) are currently not accessed by the robot."
mailbox.36 "All I/E Station slots are currently configured as storage. Use lock/unlock to allow access to the CM module."
mailbox.37 "CAUTION: Configurations without I/E Station support will not allow operations that require I/E elements."
importMedia.1 "Import Media"
importCleaningMedia.1 "Import Cleaning Media"
exportMedia.1 "Export Media"
exportCleaningMedia.1 "Export Cleaning Media"
importMedia.2 "import"
exportMedia.2 "export"
mailboxCaution.1 "CAUTION: You must remove all media from I/E Station(s) before you change the current configuration.\n\nSelect "Apply" to perform the operation."
mailboxCaution.2 "CAUTION: You must remove all media from I/E Station(s) before you change the current configuration."
mailboxCaution.3 "CAUTION: Configurations without I/E Station support will not allow operations that require I/E elements. You must also remove all media from I/E Station(s) before you change the current configuration."

driveMgmtOptions.1 "Create a firmware tape"
driveMgmtOptions.2 "Update drive firmware from tape"
driveMgmtOptions.3 "Erase a firmware tape"
driveMgmtOptions.4 "Clean drive"
updateDriveFirmwareCaption.1 "Update Drive Firmware"
createFirmwareTapeCaption.1 "Create Drive Firmware Tape"
eraseFirmwareTapeCaption.1 "Erase Drive Firmware Tape"
createFirmwareTapeAction.1 "Select the drive to create the firmware tape from:"
eraseFirmwareTapeAction.1 "Select the drive to perform erase of tape:"

partitionManagement "Partition Management"
partitionManagementCreate "Create Partition"
partitionManagementDelete "Delete Partition"
partitionManagementIEslots "Configure I/E Station Slots"
partitionManagementCleaningslots "Configure Cleaning Slots"
partitionManagementDeleteAll "Delete all Partitions"
deleteAllPartitions "CAUTION: After deleting all partitions, all library resources (drives, media and slots) become unassigned. You must create at least one partition to use these resources.\n\nSelect "Apply" to delete all partitions?"
rmiReconnectMessage "The local console has lost communication with the library server and is currently trying to reconnect. If the connection continues to fail, the library should be rebooted."
chooseLocalOrRemoteSetup "You can finish setting up your library on this console or on a remote computer using a Web browser. It is recommended that you set up remotely as there are more options available. (NOTE: To use the remote interface, you will need to install the Host Ethernet cable, and cancel this setup)."
ivtLibraryOffline "CAUTION: This operation will take all partitions offline and limit successful host communication.\n\nSelect "Apply" to perform the operation."
ivtScratchNeededLibraryOffline "CAUTION: This operation will take all partitions offline and limit successful host communication.\n\nBefore continuing this operation, make sure the scratch tape is placed in the top I/E Station slot, scanned and assigned for system use.\n\nSelect "Apply" to perform the operation."

CommandHistoryLogViewLogWarning.1 "E-mail configuration must be set up. The e-mail configuration can be set up using the web client."
IvtEmailLogWarning.1 "To be able to e-mail logs, the e-mail configuration must be set up. The e-mail configuration can be set up using the web client."
ivtNotSupportedMsg "Your library does not support the Installation & Verification Tests selection as it was built prior to July 01, 2008. Please refer to the user's guide for more details."
ivtString "Installation & Verification Tests"
