Sun ホスト・システム上の QLogic アダプターの以下の推奨構成設定を使用できます。
表 1 には、 QLogic QLA2310F、QLA2340、および QLA2342 アダプターで推奨されている構成設定が示されています。 これらの設定は、DS6000™に直接、またはファブリック・スイッチを介して接続されているホストに使用します。
| パラメーター | 推奨設定値 |
|---|---|
| hba0-max-frame-length | =2048; |
| hba0-max-iocb-allocation | =256; |
| hba0-execution-throttle | =31; |
| hba0-login-timeout | =4; |
| hba0-login-retry-count | =1; |
| hba0-fabric-retry-count | =10; |
| hba0-adapter-hard-loop-ID | =0; |
| hba0-enable または disable-64bit PCI DMA addressing |
|
| hba0-enable または /disable-LIP-reset | =0: 使用不可 |
| hba0-enable または disable-LIP-full-login | =1: 使用可能 |
| hba0-enable または disable-target-reset | =0: 使用不可 |
| hba0-reset-delay | =5; |
| hba0-port-down-retry-count | =30; |
| hba0-link-down-error | =1: 使用可能 |
| hba0-loop-down-timeout | =60; |
| hba0-connection-options |
|
| hba0-device-configuration-mode | =1: ポート名を使用 |
| hba0-fc-tape |
|
| hba0-fc-data-rate | =2: 自動ネゴシエーション |
| hba0-command-completion-option | =0: 応答キュー |
| persistent binding only option | =0: オペレーティング・システムへの 永続バインディングおよび非バインディング・デバイスのディスカバリーの報告 |