Apply Configuration — Select storage unit (Simulated only)

Use this page to select the storage unit on which you wish to apply a simulated configuration.

Introduction

To apply a configuration, first select the storage unit you want to work with. You must be network connected to the storage unit.

Note: You can only apply a configuration to an unconfigured storage unit. In the table, use the Total raw GB and Total available GB columns to see which storage units are unconfigured. If the Total raw GB and the Total available GB column values are the same, it is likely that the storage unit is unconfigured.

Menu path

Simulated manager > Manage hardware > Storage units > Select a storage unit > Select Action: Apply Configuration... > Go

Fields

Select storage unit

Select: The radio buttons for the storage units. Select one to specify the storage unit on which you wish to apply the simulated configuration.
Nickname: The user defined or default nickname of the storage unit.
Serial number: The serial number (for example, 75-FA120).
Type-Model:: The machine type and model number (for example, 1750-511).
Storage units: [1-2]: The number of storage units, 1 or 2.
Total raw GB: The total amount of raw disk capacity on this storage unit.
Total available GB: The available amount of disk capacity on this storage unit.
iSeries serial number: The serial number of the attached iSeries server.