Intel running Novell NetWare host attachment

This section describes how you attach a Novell NetWare host system to a DS6000™ with fibre-channel adapters.

Before you attach a host, review the following information:

The General requirements for attaching a host system
The DS6000 Interoperability Matrix at http://www.ibm.com/servers/storage/disk/ds6000/ for the most current information and details for hosts, operating systems, adapters, and switches
A list of supported host bus adapters (HBAs), firmware, and device driver information for your host system and host adapter at http://www-03.ibm.com/servers/storage/support/config/hba/index.wss

Installing an Emulex adapter and driver for a Novell NetWare host
This section provides installation steps for installing the Emulex adapter driver on a Novell NetWare host.
Installing a QLogic adapter and driver for a Novell NetWare host
This section tells you how you install a QLogic adapter and driver on a Novell NetWare host system.
Locating the WWPN for a QLogic adapter on a Novell NetWare host
Complete this task to locate the WWPN for a Novell NetWare host.

Parent topic: DS6000 host attachment

Related information

General requirements for attaching a host system