lsaddressgrp

The lsaddressgrp command displays a list of address groups for a storage image and the status information for each address group in the list.


>>-lsaddressgrp--+-------------------------+--+-----+----------->
                 '- -dev--storage_image_ID-'  +- -s-+   
                                              '- -l-'   

>--+--------------------+--------------------------------------><
   '- -stgtype--+-fb--+-'   
                '-ckd-'

Parameters

-dev storage_image_ID: (Optional). Specifies the storage image ID, which consists of manufacturer, type, and serial number. Displays only the objects for the storage unit specified.; Example: IBM.1750-68FA120
-s: (Optional). Displays the address group IDs only. You cannot use the -l and the -s parameters together.
-l: (Optional). Displays the default output. You cannot use the -l and the -s parameters together.
-stgtype fb | ckd: (Optional). Displays only the address groups that are associated with the specified storage type.

Example

For this command and all other DS CLI list commands, the results are shown in table format to provide clarity. The actual reports do not display as tables.

The following table represents the headers that are displayed on the output report that is associated with the lsaddressgrp command using the -l parameter. A separate example is not shown for the 1750 as the information is the same for both the 2107 and 1750.

Invoking the lsaddressgrp command

dscli>lsaddressgrp  -dev IBM.2107-75FA120 -l

The resulting output

Sun Aug 11 02:23:49 PST 2004 IBM DS CLI Version: 5.0.0.0 DS: IBM.2107-75FA120

ID	Stgtype	Basevolnum	Vols	LSSs	Confgvols
IBM.2107 -75FA120 /0	fb	0000	4096	16	164096
IBM.2107 -75FA120 /1	fb	0100	4096	16	164096
IBM.2107 -75FA120 /2	ckd	0200	4096	16	164096
IBM.2107 -75FA120 /3	ckd	0300	4096	16	164096

Report field descriptions

ID: Specifies the storage image address group unique identifier. The address number is a single hexadecimal character (0 - 9 or uppercase A - F).
Stgtype: Specifies the type of logical devices that are configured for the specified address group: fb - fixed block and ckd - count key data.
Basevolnum: Specifies the lowest logical volume number in the address group.
Vols: Specifies the number of logical volume numbers that are associated with the address group
LSSs: Specifies the number of logical subsystems (LSSs) that are configured on the address group.
Confgvols: Specifies the number of logical volumes that are configured on the address group.