showlss

The showlss command displays detailed properties of a logical subsystem (LSS).


>>-showlss--+-------------------------+--+-LSS_ID-+------------><
            '- -dev--storage_image_ID-'  '-" - "--'

Parameters

-dev storage_image_ID

(Optional) Specifies the storage image ID, which consists of manufacturer, machine type, and serial number. This parameter is required if you do not specify a fully qualified ID for the logical subsystem; otherwise, it is optional.

LSS_ID | -

(Required) Displays the properties for the specified logical subsystem. This parameter accepts a fully qualified LSS ID, which consists of the storage image ID, or a shortened version without the storage image ID if the -dev parameter is specified. The shortened version is two hexadecimal digits in the range 00 - 1F (1750 only).

The following is an example of a fully qualified LSS ID: IBM.2107-75FA120/10

The following is an example of a shortened version of the LSS ID when the dev parameter is specified:

dscli>showlss -dev IBM.2107-75FA120 10

If you specify the dash (-), this parameter information is automatically supplied.

Example

For this command and all other DS CLI show commands, the results are shown in table format to provide clarity. The actual reports do not display as tables.

The following tables represent the headers that are displayed on the output report that is associated with the showlss command. A separate example is not shown for the 1750 because the information is the same for both the 2107 and 1750.

Invoking the showlss command to show default information

dscli>showlss IBM.2107-75FA120/10

The resulting output

DS CLI Version: 5.0.0.0 DS: IBM.2107-75FA120
Sun Aug 11 02:23:49 PST 2004 IBM

ID	Group	Addrgrp	Stgtype	Confgvols
IBM.2107- 75FA120 /10	0	1	fb	256

Pprcconsistgrp	Xtndlbztimout (secs)	Subsys
Disabled	120	FF10

Report field definitions

ID: Specifies the unique identifier that is assigned to this logical subsystem. It includes the storage image ID and the 2 digit LSS ID 00 - 1F (1750 only).
Group: Specifies the server that manages the logical subsystem. The displayed values are 0 or 1.
Addrgrp: Specifies the address group object that the logical subsystem is a member of.
Confgvols: Specifies the number of volumes that are assigned to this logical subsystem.
Stgtype: Specifies the type of storage volumes contained by this logical subsystem. The value displayed is fb (fixed block) or ckd (count key data)
Pprcconsistgrp: Specifies the assigned PPRC consistency group state setting. If you do not designate enabled, the default value of disabled is assigned.
Xtndlbztimout (secs): Specifies the assigned extended long busy timeout value. If you do not designate a value, the default value of 210 seconds is assigned and displayed.
Subsys: Specifies the user assigned, or default SSID value.