The showsu command displays detailed properties of an individual storage unit.
Parameters
- storage_unit_ID
- (Required) Specifies the storage unit ID. A storage unit ID consists of manufacturer, machine type, and serial number.
Example
For this command and all other DS CLI show commands, the results are shown in table format to provide clarity. The actual reports do not display as tables.
The following table represents the headers that are displayed on the output report that is associated with the showsu command. A separate example is not shown for the 1750 because the information is the same for both the 2107 and 1750.
Invoking
the showsu command
dscli>showsu DS: IBM.2107–75FA120
The resulting output
Date/Time: Sun Aug 11 02:23:49 PST 2004 DS CLI Version: 5.0.0.0 DS: IBM.2107–75FA120
| Name | Desc | ID | Model | WWNN | Config |
|---|---|---|---|---|---|
My |
This |
IBM.2107- |
921 | 3007ACF |
One I/O |
| Pw State | Pw Mode | Reqpm | Processor Memory |
|---|---|---|---|
| On | Local | Remote |
1 GB |
Report field definitions
- Name
- Specifies the name that you assigned for the designated storage unit. This value is null (-) if you have not assigned a name to a storage unit.
- Desc
- Specifies the description that you assigned for the designated storage unit. This value is displayed as a null (-) if no description has been assigned.
- ID
- Specifies the storage unit ID which consists of the manufacture name, machine type, and serial number.
- Model
- Identifies the model number of the designated storage unit.
- WWNN
- Specifies the World Wide Node Name for the listed storage unit. This value is null (-) if the WWNN is not known.
- Config
- Specifies the internal I/O interface configuration for the storage unit.
One of the following values is displayed:
- Undefined
- Indicates that a configuration upgrade is in progress that causes the configuration option to change.
- One I/O interface
- Indicates that there is one dedicated I/O interface between the I/O enclosure pairs and storage enclosures.
- Two I/O interfaces
- Indicates that there are two dedicated I/O interfaces between the I/O enclosure pairs and storage enclosures.
- Four I/O interfaces
- Indicates that there are four dedicated I/O interfaces between the I/O enclosure pairs and storage enclosures.
- Six I/O interfaces
- Indicates that there are six dedicated I/O interfaces between the I/O enclosure pairs and storage enclosures.
- Pw State
- Indicates the power status of the listed storage unit. One of the following
values is displayed:
- On
- Indicates the storage unit power is on.
- Off
- Indicates the storage unit power is off.
- Turning On
- Indicates the storage unit power is in the process of turning on.
- Turning Off
- Indicates the storage unit power is in the process of turning off.
- Power Exception
- Indicates that storage unit power is on, but online operation is not possible due to a power fault in one of the storage unit frames.
- Pw Mode
- Indicates the power control mode in effect for the listed storage unit.
One of the following values is displayed:
- Local
- Indicates that the SMC local/remote switch is set to the local power control mode.
- Remote SMC Manual
- Indicates that the SMC local/remote switch is set to remote and that the power control mode is set to manual power control.
- Remote SMC Auto
- Indicates that the SMC local/remote switch is set to remote and that the power control mode is set to auto-power control.
- Remote zSeries Power Control
- Indicates that the SMC local/remote switch is set to remote and that the power control mode is set to zSeries remote power control.
- Reqpm
- Indicates the power control mode to apply when the local/remote switch
is set to remote power control mode. One of the following values is displayed:
- Remote SMC Manual
- Remote SMC Scheduled
- Remote SMC Auto
- Remote SMC Scheduled/Auto
- Remote zSeries Power Control
Note: The default value is remote SMC Manual mode. - Processor Memory
- Specifies the amount in gigabytes of processor memory configured on the storage unit.