Paste zSeries LCU — Define LCU properties

Use this page to define the parameters for the logical control units (LCUs).

Menu path

Real-time manager or Simulated manager > Configure storage > zSeries > LCUs > Select Action: Paste... > Go

LCU type: The value of the selected LCU. It is one of the supported count-key-data (CKD) base control unit types.
Increase SSID by one for all selected LCUs starting with the following value: If checked, this Define LCU properties page is the only that is required for completion. Based on the entry in the following SSID field, the SSIDs are incremented by one. If you uncheck this box, you must enter an SSID for all of the selected LCUs in the previous Select from available LCUs wizard page. One page is displayed for each LCU where you enter the SSID for each LCU. Also, this box and label do not appear on the subsequent pages.
SSID: The next available in order of creation (for example, 0100). You can change the default SSID by highlighting and typing over it. If you select more than one LCU from the previous page and select the Increase SSID by one for all selected LCUs starting with the following value check box, the SSIDs are sequentially incremented by 1 starting from this entry as the first SSID.