Installing the Emulex adapter for a PRIMEPOWER host

This section tells you how to configure an Emulex adapter card and driver for a PRIMEPOWER host.

Single- and dual-port, fibre-channel interfaces with an Emulex adapter card support the following public and private loop modes:

Record the IEEE number that is printed on the Emulex adapter card. You can use the IEEE number to determine the WWPN.
Install the Emulex adapter card in your PRIMEPOWER host.
Follow the steps to download and install an adapter driver in Downloading and installing a host adapter driver.

Parameter settings for the Emulex LP9002L adapter
You can use these recommended configuration settings for your Emulex adapter on a PRIMEPOWER host system.
Setting parameters for Emulex adapters
This section provides instructions for setting parameters for Emulex adapters for your PRIMEPOWER host system.
Configuring host device drivers for a PRIMEPOWER host
Complete this task be to update the PRIMEPOWER driver configuration file. This procedure gives you access to target and LUN pairs that are configured on the storage unit.
Locating the WWPN for a Fujitsu PRIMEPOWER host
Complete this task to locate the WWPN for a PRIMEPOWER host system adapter.

Parent topic: Fujitsu PRIMEPOWER host attachment