Verifying the installation of a fibre-channel adapter card for SGI

Complete this task to verify your installation of a fibre-channel adapter card for SGI.

1. Type # ls -l /hw/scsi_ctlr to verify that the command created the links for the controllers.

   Figure 1 shows example results for the # ls -l /hw/scsi_ctlr command. In this example, the PCI host bus adapters are installed in slots 6 and 8 and the XIO host bus adapters are installed in slots 7 and 9.

   Figure 1. Example of PCI bus slots

   # ls -l /hw/scsi_ctlr
   lrw-------    1 root     sys           50 Mar 27 10:31 6 -> /hw/module/1/slot/io7/xtalk_pci/pci/1/scsi_ctlr/0
   lrw-------    1 root     sys           48 Mar 27 10:31 7 -> /hw/module/1/slot/io2/pci_xio/pci/0/scsi_ctlr/0
   lrw-------    1 root     sys           50 Mar 27 10:31 8 -> /hw/module/1/slot/io6/xtalk_pci/pci/1/scsi_ctlr/0
   lrw-------    1 root     sys           48 Mar 27 10:31 9 -> /hw/module/1/slot/io2/pci_xio/pci/1/scsi_ctlr/0

2. Type scsiha -w /hw/scsi_ctlr/<N>/bus, where <N> is the number of the PCI bus, to confirm the installation of the fibre-channel driver.