Configuring a HP AlphaServer Tru64 UNIX host

The following sections tell you how to configure a HP AlphaServer Tru64 UNIX host with fibre-channel adapters.

• Confirming fibre-channel switch connectivity for Tru64 UNIX
  This section lists the steps you need to perform to confirm fibre-channel switch connectivity for Tru64 UNIX.
• Confirming fibre-channel storage connectivity for Tru64 UNIX
  This section lists the steps you must perform to confirm fibre-channel storage connectivity for an HP Tru64 UNIX host system.
• Tru64 UNIX UDID hexadecimal representations
  This section describes UDID representations for storage unit volumes.
• Preparing to boot from the storage unit for the Tru64 UNIX host system
  Use the wwidmgr command to set up each device that you use for booting or dumping. After you set up a device, the console retains the information that is needed to access the device in nonvolatile memory.
• Configuring kernel SCSI parameters on an HP AlphaServer Tru64 UNIX host system
  This section describes how to set up and configure the Tru64 Unix device parameter database.
• Verifying fibre-channel attachment to Tru64 UNIX
  This section contains steps you must perform to verify the fibre-channel attachment of the storage unit volumes to the Tru64 UNIX host system.