Confirming fibre-channel switch connectivity for OpenVMS

This section lists the steps you must perform to confirm fibre-channel switch connectivity for the OpenVMS host system.

Open a telnet session and log in to the switch as an administrator.
Confirm that each host adapter has performed a fabric login to the switch. Figure 1 shows an example of what displays when you type the switchshow command.
Confirm that each storage unit host adapter has performed a fabric login to the switch. Figure 1 shows an example of what displays when you type the switchshow command.

Figure 1. Example of the switchshow command

snj2109f16h4:osl> switchshow
switchName:     snj2109f16h4
switchType:     9.1
switchState:    Online
switchRole:     Principal
switchDomain:   1
switchId:       fffc01
switchWwn:      10:00:00:60:69:50:0c:3e
switchBeacon:   OFF
port  0: id N1 Online       F-Port 50:05:07:63:00:c9:91:62
port  1: id N1 Online       F-Port 10:00:00:00:c9:22:d2:08
port  2: id N1 Online       F-Port 10:00:00:00:c9:22:6a:63
port  3: id N1 Online       F-Port 50:00:1f:e1:00:00:2b:11
port  4: id N2 No_Light
port  5: id N1 Online       F-Port 10:00:00:00:c9:22:d4:69
port  6: id N1 Online       F-Port 10:00:00:00:c9:22:67:38
port  7: id N1 Online       L-Port 1 private, 3 phantom
port  8: id N2 No_Light
port  9: id N1 Online       F-Port 10:00:00:00:c9:22:69:bf
port 10: id N1 Online       F-Port 10:00:00:00:c9:21:df:4b
port 11: id N1 Online       F-Port 50:05:07:63:00:cf:8d:7e
port 12: id N2 No_Light
port 13: id N1 Online       F-Port 50:05:07:63:00:c7:91:1c
port 14: id N1 Online       F-Port 50:05:07:63:00:cd:91:62
port 15: -- N2 No_Module
snj2109f16h4:osl>