zSeries volumes — General

Use this page to work with general advanced operations for zSeries volumes.

Note: The Advanced operation selection is not available for alias volumes.

Menu path

Real-time manager > Configure storage > zSeries > Volumes – zSeries > Select a volume > Select Action: Advanced Operations > Go

Restore access

The default value reflects the state of the volume.

Unfence Volume — If the logical volume is in the segment fault or rank repaired data state, the unfence volume function is accepted and causes any indications associated with these conditions to be reset. Data on the logical volume may have been lost. The data state is updated to reflect the current condition of the logical volume after resetting these conditions. Normally, the data state should change to normal, pinned, or read-only. If the operation is accepted repeatedly, but does not result in an online access state, the logical volume should be deleted and reconfigured if still required.
Note: A confirmation message indicates the selected operation and consequence.

View status button

When this button is selected, the status table is displayed.