The lsproblem command lists problem logs. This command is exclusive to the DS6000.
>>-lsproblem--+-----+--+--------------+--+------------+--+---------------------+--storage_image_ID->< +- -s-+ '- -from--date-' '- -to--date-' '- -state--+-open---+-' '- -l-' '-closed-'
Parameters
- -s
- (Optional) Displays problem IDs. You cannot use the -l and the -s parameters together.
- -l
- (Optional) Displays the default output and attributes that are identified as long output. You cannot use the -l and the -s parameters together.
- -from date
- (Optional) To print problem IDs for a range of dates, enter the start date (in the format of mm/dd/yyyy) for the range. For example, 06/11/2005.
- -to date
- (Optional) To print problem IDs for a range of dates, enter the end date (in the format of mm/dd/yyyy) for the range. For example, 08/24/2005.
- -state open | closed
- (Optional) The problem state that you want to print in the log.
- storage_image_ID
- (Required) Specifies a storage image ID. Accepts a fully qualified storage image ID. A storage image ID consists of manufacturer, machine type, and serial number.
Example
The following tables represent the headers that are displayed on the output report associated with the lsproblem command using the -l parameter.
Invoking the lsproblem command
dscli>lsproblem -l IBM.1750-68FA120
The
resulting output
Date/Time: Sun Aug 11 02:23:49 PST 2004 DS CLI Version: 5.0.0.0 DS: IBM.1750-68FA120
| ID | Node | Type | Sev | Occur | State |
|---|---|---|---|---|---|
2004-02-12 |
0 | H/W | Problem | 1 | Open |
| Frus | FruList | SRN | First |
Last |
Detec- |
|---|---|---|---|---|---|
| 1 | BE804900 | 2004-02-12- |
2004-02-12- |
SES |
Report column definitions
- ID
- Specifies the identification number that is assigned to the problem.
- Node
- Specifies the node (0 or 1) on which the problem record is created. The node number, along with the Problem ID, uniquely identifies a problem record.
- Type
- Specifies the type of problem. One of the following choices is displayed:
- H/W
- S/W
- Test
- Heartbeat
- Data Loss
- SEV
- Specifies the severity of the problem. One of the following choices is
displayed:
- Problem
- Event
- Attention
- Test
- Heartbeat
- Occur
- Specifies the number of times that the problem occurs.
- State
- Specifies the state of the problem as being open or closed.
- FRUs
- Specifies the number of FRUs that are suspended for causing the problem.
- FRUList
- Specifies the list of FRUs that are candidates for replacement in order to solve the problem. This list also specifies the FRUs that have been replaced and identifies those that need to be replaced.
- SRN
- Specifies the SRN (service reference number), also known as SRC, which is a 4-byte value.
- Firsttime
- Specifies the first timestamp of the problem.
- Lasttime
- Specifies the last timestamp of the problem.
- Detector
- Specifies the component type that found the problem. One of the following
choices is displayed:
- Harvest
- RAS
- AH
- Bering
- SES