The setdialhome command activates the Call Home feature.
>>-setdialhome--+-----------------------+--storage_image_ID---->< '- -action--+-enable--+-' '-disable-'
Parameters
Notes:
- The setdialhome command is not associated with the modem Call Home feature. DS CLI cannot be used to configure the modem or test modem availability and connection.
- Before using the setdialhome command, you must ensure
the following:
- The setsmtp command must be enabled.
- The required contact information must be set in place through the use
of the setcontactinfo command. This information consists of the following:
- Company name
- Country
- State or province
- Primary contact phone number
- You can view the changes of a processed setdialhome command by issuing the showplex command.
- -action enable | disable
- (Optional) Enables or disables the Call Home feature.
- storage_image_ID
- (Required) Specifies the storage image ID. A storage image ID consists of the values associated with the manufacturer, machine type, and serial number.
Example
Invoking the setdialhome command
dscli>setdialhome -action enabled
IBM.1750-68FA120
The resulting
output
Date/Time: Sun Aug 11 02:23:49 PST 2004 DS CLI Version: 5.0.0.0 DS: IBM.1750-68FA120 The dial home settings were successfully modified