The setsmtp DS6000 command modifies the storage image Simple Mail Transport Protocol (SMTP) and activates the e-mail notification settings.
>>-setsmtp--+--------------------------------------+------------> '- -server--smtp_server_IP:port_number-' >--+------------------------+--storage_image_ID---------------->< '- -emailnotify--+-on--+-' '-off-'
Parameters
Note: You can view the changes of a processed setsmtp command
by issuing the showplex command.
- -server smtp_server_IP:port_number . . .
- (Optional) Specifies the SMTP port and IP address where a message is sent in the event of a problem. You must separate the IP address and the port with a colon. Do not include blank spaces.
- -emailnotify on | off
- (Optional) Specifies that an e-mail notification be sent to the e-mail
address that is specified by the setcontactinfo command with the -contactemail parameter. Note: Before you process the setsmtp command with this parameter, run the showcontactinfo command to ensure that a contact e-mail address has been defined. If a contact e-mail address has not been defined, process the setcontactinfo command with the -contactemail parameter to allow you to receive notifications.
- storage_image_ID
- (Required) Specifies the storage image ID. A storage image ID consists of the values associated with the manufacturer, machine type, and serial number.
Example
Invoking the setsmtp command
dscli>setsmtp –server 9.11.242.12:500 IBM.1750-68FA120
The
resulting output
Date/Time: Sun Aug 11 02:23:49 PST 2004 DS CLI Version: 5.0.0.0 DS: IBM.1750-68FA120 The SMTP settings were successfully modified