Assign storage unit — Network settings (real-time only)

Use this page to define network settings.

Introduction

Network settings are required for both processor cards.

Real-time manager > Manage hardware > Storage complexes > Select Action: Assign Storage Unit... > Go

Processor controller card 1 IP Address

The user-selected IP address for processor card 1. The same IP address can be used for both processor card 1 and processor card 2.

Gateway

The user-selected gateway address. To assign a storage unit without a gateway, enter the address 0.0.0.0.

Primary domain name server (DNS)

The user-selected primary domain name server information. You can enter either the IP address or the name of the DNS.

IP address: The user-selected primary domain name server IP address. This is available only if you do not enter a DNS name below.

Maximum transmission unit (bytes) (1 to 9000)

The user-selected maximum rate for transmission. This can be any number from 1 to 9000.

Processor controller card 2 IP Address

The user-selected IP address for processor card 2. The same IP address can be used for both processor card 1 and processor card 2.

Subnet mask

The user-selected IP address for the network mask.

Alternate domain name server (DNS)

The user-selected secondary domain name server information. You can enter either the IP address or the name of the DNS.

IP address: The user-selected secondary domain name server IP address. This is available only if you do not enter a DNS name below.