Complete the network settings work sheet to define your network settings that you need if the DS6000™ series is connected to a network.
| Item or Setting | Instructions | Your information |
|---|---|---|
| Processor card 1 IP Address | Provide the dotted decimal IP address that you are assigning for Processor card 0 in the DS6800. The current IP address can either be the default address (if a new address has not been specified) or a user-defined address (if the default address had been changed). | |
| Processor card 2 IP Address | Provide the dotted decimal address that you are assigning to Processor card 1 in the DS6800. The current IP address can either be the default address (if a new address has not been specified) or a user-defined address (if the default address had been changed). | |
| Gateway 1 | Provide the dotted decimal or symbolic name address of the gateway (for example, 9.113.155.254 or sanjosegate). | |
| Subnet mask | Provide the dotted decimal address of Subnet (network) mask. | |
| Primary domain name server (DNS) | Provide the domain server name and IP address. You must fill-in either the host name or IP address, or both. | |
| Alternate domain name server (DNS) | You can optionally provide an alternate DNS. You must fill-in either the server name or IP address, or both. | |
| Maximum transmission unit (bytes) | You can optionally provide the maximum rate for transmission. The valid range is 1 to 9000 bytes. | |
| Simple Network Management Protocol (SNMP) destination | Provide the host names or the dotted decimal addresses of the destinations that are to receive SNMP (for example, destination.com or 9.113.152.254). | |
| Simple Mail Transfer Protocol (SMTP) | Provide either the SMTP server name or the SMTP IP address. |