Installing the front display panel

Complete this task to install or replace the front display panel or the right front bezel. If you are installing the front panel display after removing it for a servicing procedure, you can install it whether the system is powered off or powered on.

Important: When you replace the front display panel in an enclosure, ensure that all resources from a particular server or expansion enclosure are reinstalled into the same physical enclosure and in the same location inside that enclosure.

The front display panel and right front bezel are located on the left and right of the front of the enclosure, respectively.

To install the front panel display, perform the following steps:

1. Use the handle to align the top of the display panel with the empty slot. The top of the front display panel must fit over the metal support at the top of the slot at the same time that the back of the handle fits under the metal catch on the side of the slot.
2. Push the handle down and into the recessed slot so that it is flush with the front of the enclosure. This will lock the front display panel into position.

This image shows a front display panel replacement procedure.