Replacing the processor cards

If you removed the processor cards to reduce the weight of the enclosure before installation, complete this task to replace the processor cards.

The processor cards are located in the rear of the enclosure. One of the cards is below the rear operator panel and above the battery backup units. The other card is located below the battery backup units and above the system service card.

To replace the processor cards, perform the following steps:

1. Grip the processor card with both hands to align the resource with the slot.
2. Using both hands, push the processor card into the slot until the handle mechanism stops the forward movement.
3. Push both handles in and towards the center of the enclosure at the same time until the release button clicks. This inserts the remaining portion of the processor card into the slot.

These images show a processor card replacement procedure.