The LEDs display the status of the expansion server and components.
Green LEDs indicate a normal operating status; amber LEDs indicate a possible
failure.
Note: The green drive active LED and amber drive fault LED might
flash intermittently as the drives spin-up. Wait until the DS6000™ is finished powering up before you check the LEDs on the front of the storage
unit.
After you power on the enclosure, the information indicator flashes to indicate that the system is initializing and is not yet ready to be accessed by either the management console or host systems. Initialization is complete, and the system is ready for I/O, once the flashing amber light turns off.
To verify the status of the server and expansion enclosures, perform the following steps:
- At the front and rear of the server and expansion enclosures, verify that the LEDs are displaying the appropriate state. Table 1 provides a list of LED information. Additional LED information is available from inside the DS6000 Information Center.
