Properties — Attributes

Introduction

This page displays the general properties for the storage unit, enclosure, and resource selections from the Properties page. Only the table fields that are applicable to the selection are displayed in the table.

Menu path

Menu path

Fields

Not all of these fields are always available. Some of these fields are only available when you view general properties for storage complexes or storage units.

This page is available in both real-time and simulated modes.

Storage complex

The user-assigned name of the storage complex that contains the resources that are summarized.

Storage unit

The user-assigned name of the storage unit that contains the resources that are summarized.

Enclosure

The number of the enclosure that contains the resources that are summarized. Values can be 00 through 06 and 10 through 16, depending on the number of enclosures that are available on the selected storage unit.

Resource

The name of the resource that is summarized in the work area.

Management Console 1 Nickname

The user-assigned nickname for Management Console 1.

Management Console 2 Nickname

The user-assigned nickname for Management Console 2.

DDMs

The number of DDMs that are contained within the selected storage unit.

Device adapter pairs

The number of device adapter pairs that are contained within the selected storage unit.

I/O adapters

The number of I/O adapters that are contained within the selected storage unit.

MTMS

The model type, model number, and serial number of the selected storage unit.

Firmware level

The level of the most recently applied firmware update for the storage unit. This field only displays when the server enclosure and processor card are selected.

Processor card 1 IP address

The user-defined, dotted decimal IP address for processor card 0.

Processor card 2 IP address

The user-defined, dotted decimal IP address for processor card 1.

WWNN

The worldwide node name of the selected storage unit.

Machine signature

A 12-digit hexadecimal number that uniquely identifies the selected storage unit.

Nickname

The user-assigned name of the selected storage unit.

Identifier

The identification number of the enclosure. This field displays when an you select an enclosure.

Model type

The type of model of the storage unit that contains the specified enclosure. This field only displays when an you select an enclosure.

Enclosure type

The type of the selected enclosure. Values are Server or Storage.

Location

The physical location of the specified resource. This table field displays when you select a resource.

Manufacturer of part

The name of the manufacturer of the selected component.

Part order number

The order number for the selected component. This is the number to use when you order the component.

Serial number

The serial number of the selected component.

Hardware Engineering Change (EC) level

The hardware EC level for the selected component.

Capacity (GB)

The total capacity, in gigabytes, of the storage that is contained within the selected resource.

RPM

The speed of the disk, in revolutions per minute.

DDM Usage

The way that the DDM is currently being used. The DDM is set to one of the following values:

Unassigned

The DDM is not assigned to an array site.

Unconfigured

The DDM is assigned to an array site, but the array site is not configured and the DDM is not a required spare.

Spare - Required

The DDM is assigned to an array site and is a required spare.

Spare - Not Required

The DDM is assigned to an array site that is configured with an array and a spare, but the spare is not a required spare. The array site can be configured from a narrow array to a wide array.

Array Member

The DDM is assigned to an array site that is configured and the array site position of the DDM makes it part of the array.

DDM type

The name of the manufacturer of the selected component.