The
DS6000 series
requires an Electronic Industries Association (EIA) 310-D Section 1 19-inch
rack cabinet. The distance between EIA rails, from the front to the rear of
the rack, is 69.5 centimeters (27.36 inches) minimum to 76.5 centimeters (30.12
inches) maximum. This rack conforms to the EIA standard. Where you place the
support rails in the rack depends on where you intend to position the server
or enclosure enclosure.
- Review the documentation that comes with your rack enclosure for safety
and cabling considerations.
- To ensure rack stability, load the rack starting at the bottom.
- If you install multiple components in the rack, do not overload the power
outlets.
- Always connect the enclosure server to a properly grounded outlet.
- Always connect the rack power to at least two different power
circuits or sources. This reduces the chance of a simultaneous loss of both
ac power sources.