ca#-02-i.01
-   
The dashed yellow lines are the entities you create in  
this step.                                                    
Choose option   
-   
Choose the CREATE option.  
   
Choose option   
-   
Choose the LINE option.  
   
Choose option   
-   
Choose the PARALEL option.  
   
Choose option   
-   
Choose the AT DIST option.  
   
Choose option   
-   
Enter a distance of 0.5 inch.  
   
Enter distance (0.5) => 
distance  
-  
Select the highlighted line as the reference line.  
   
Select reference line  
line
-   
Cursor-indicate a position below the line.  
   
Indicate side  
-  
Select the highlighted line as the reference line.  
   
Select reference line  
line 
-  
Cursor-indicate a position above the line.  
   
Indicate side  
-  
ca#-02-i.02
-  
Choose BACK-UP to change the parallel distance.    
   
Select reference line  
-  
Enter a distance of 0.25 inch.  
   
Enter distance (0.5) => 
distance  
-  
Select the highlighted line as the reference line.  
   
Select reference line  
line 
-  
Cursor-indicate a position to the right of the line.  
   
Indicate side  
-  
Choose BACK-UP to change the parallel distance.    
   
Select reference line  
-  
Enter a distance of 1.00 inch.  
   
Enter distance (0.25) => 
distance  
-  
Select the highlighted line as the reference line.  
   
Select reference line  
line 
-  
Cursor-indicate a position to the right of the line.  
   
Indicate side  
-  
Press ESCAPE to exit from this function.  
  
Select reference line  
-  
ca#-02-r.03
-