db#-01-i.01
- 
Above is an illustration of the Finger Guide at the end
of this module. 
Choose option
-
db#-01-i.02
-
The highlighted line will be created in construction 
view 2, the front view. 
Choose option 
- 
Use the Immediate Mode command, ALT-K, to switch to 
Construction View 2.  
Choose Option
ALT-K
- 
Enter 2 to change the construction plane to the front
view.  
Enter const plane number or choose menu option (1-8) => 
- 
The construction axes gnomen has realigned to illustrate
its view 2 orientation. 
Choose option 
- 
Choose the CREATE option. 
  
Choose option 
- 
Choose the LINE option. 
  
Choose option 
- 
Choose the ANGLE option. 
  
Choose option 
- 
Enter an angle of -13.5 degrees. 
  
Enter angle (30) => 
angle 
- 
Select the highlighted portion of the line. 
  
Select a line
line 
- 
Choose the ENDENT option. 
  
Indicate endpoint for angled line  / Cursor-Indicate position
- 
Select the highlighted portion of the line. 
  
Indicate endpoint for angled line  / Select entity
line 
- 
Press ESCAPE to exit from this function. 
  
Choose option
- 
db#-01-i.03
-
Choose the EDIT option. 
  
Choose option 
- 
Choose the TRM/EXT option. 
  
Choose option 
- 
Choose the FIRST option. 
  
Choose option 
- 
Select the highlighted section of the line as the entity
to trim. 
Select entity to trim
line
-
Select the highlighted line as the trimming entity.
 
Select trimming entity
line
-
Use the Immediate Mode command, ALT-K, to disable the 
construction view.
Select trimming entity
ALT-K
- 
Choose the CP = DV option to set the construction plane
back to the display view.  
Enter const plane number or choose menu option (1-8) => 
- 
Notice the construction axes gnomen has disappeared.
Press ESCAPE to exit this function.
Select entity to trim
-
db#-01-r.04
-