1 %s
2   '%s'
3 %s %s
4 Writing IGES file Start Section ...
5 Writing IGES file Global Section ...
6 Writing IGES file Directory Entries ...
7 Writing IGES file Parameter Data ...
8 Writing IGES file Terminate Section ...
9 Unable to open Response file:
10 Processing CADKEY Level entities ...
11 Processing CADKEY database ...
12 Processing CADKEY Collective ...
13 Processing Advanced Modeler entities ...
14 Processing CADKEY Layouts ...
15 Processing CADKEY Layout Instances ...
16 Ignoring all '%s' entities
17 Cadkey color #%d
18 Skip Phydep D:%4ld (%3d:%3d) '%s' 
19 Done creating CADKEY Part ... Saving
20 Layout imported from IGES
21 Default record size is %ld characters
22 START section has %ld lines
23 GLOBAL section has %ld lines
24 DIRECTORY section has %ld lines
25 PARAMETER section has %ld lines
26 TERMINATE section has %ld lines
27 processing temporary transformation matrix
28 NOTE: Unable to open IGES configuration file
29       Using current system configuration
30 DT Error %d: ID %ld  Type %d
31 Skip: ID %3ld '%s'
32 Ign : ID %3ld '%s'
33 Read: ID %3ld '%s'
34 Tran: D:%4ld (%3d:%3d) '%s' 
35 ERROR (%d): [%s:%d]
36 ERROR (%d):
37 IGES FILE GLOBAL SECTION DATA:
38 ( 1) - Parameter Delimitor is '%c'
39 ( 2) - Record Delimitor is '%c'
40 ( 3) - Product ID from sending system is '%s'
41 ( 4) - File name is '%s'
42 ( 5) - System ID is '%s'
43 ( 6) - Preprocessor version is '%s'
44 ( 7) - Number of bits for an integer is %ld
45 ( 8) - Maximum exponent for single precision float is %ld
46 ( 9) - Significant digits for single precision float is %ld
47 (10) - Maximum exponent for double precision float is %ld
48 (11) - Significant digits for double precision float is %ld
49 (12) - Product Id for receiving system is '%s'
50 (13) - Model space scale is %G
51 (14) - Unit flag is %ld
52 (15) - Units is '%s'
53 (16) - Maximum line weight is %ld
54 (17) - Width of maximum line weight is %G
55 (18) - Date and time is '%s'
56 (19) - Minimum resolution is %G
57 (20) - Maximum coordinate value is %G
58 (21) - Author's name is '%s'
59 (22) - Company's name is '%s'
60 (23) - Iges version of this file is %ld
61 (24) - Drafting standard for this file is %ld
62 (25) - Date file created or last modified is '%s'
63 Unsupported Transformation matrix, Identity matrix used instead
64 Left-handed Transformation matrix will be converted
65 Non-orthagonal matrix will be corrected
66 Can't processes D:%4ld (%3d:%3d) '%s' 
67 Ignore D:%4ld (%3d:%3d) '%s' 
68 Skip   D:%4ld (%3d:%3d) '%s' 
69 Read   D:%4ld (%3d:%3d) '%s' 
70 IGES layout D:%ld
71 Write  D:%4ld (%3d:%3d) '%s'
72 NOTE : Unable to assign IGES file global name
73        Using default output filename
74 Processing Part File ...
75 Writing IGES File ...
76 Processing IGES File ...
77 Writing Part File ...
78 Finished processing file:
79   Elapsed time %2d hrs %2d mins %2d secs
80   Elapsed time %2d mins %2d secs
81   Elapsed time %2d secs
82 No errors
83 Bad CADKEY note
84 Bad CADKEY entity data
85 Bad CADKEY entity form
86 Bad CADKEY entity type
87 Can't open IGES file
88 Empty entity
89 Missing leader and/or witness line
90 Illegal entity
91 Out of memory
92 Entity not supported
93 Error processing text files
94 Write error
95 Converted
96 No modify function
97 No function
98 DT Initialization Error
99 DT Error
100 Read error
101 DT Entity Load Error
102 No global data
103 Bad DT attribute data
104 Entity skipped
105 Advanced IGES database error
106 Continue processing
107 Bad CADKEY Conic
108 Bad Associativity entity
109 Bad Parameter Data
110 Entity Ignored
111 Bad CADKEY view
112 Bad IGES file
113 Advanced IGES Internal Error
114 Can't load CADKEY part file
115 Bad Index
116 Illegal number of lines
117 Bad Section
118 Bad Directory Entry
119 Error reading IGES file
120 Error saving CADKEY Part file (%s)
121 Bad parameter data
122 Illegal/unexpected form number
123 Illegal/unexpected IGES data
124 Delaying processing of Drawing Layout(s)
125 Math error
126 Do not proces blanked entity D:%4ld (%3d:%3d) '%s'
127 Zero length line or radius encountered
128 Unknown error
129 Converted zero length Line to a Point
130 Converted Arc/Circle with a zero length radius to a Point
131 Aborting translation of file
132 Aborting translation of session
133 Unsupported Angular dimension encountered
134 Unsupported Diameter dimension encountered
135 Unsupported Label encountered
136 Unsupported Linear dimension encountered
137 Unsupported Radius dimension encountered
138 Continuing ...  Already processed D:%4ld (%3d:%3d) '%s' 
139 No parametric curve specified (domain space)
140 No curve specified (model space)
141 Unable to access CADKEY's support path
142 Backing up current part file
143 Can not back up current part file
144 Fatal error, aborting translation of session
145 Error writing to IGES file
146 Error writing to status file
147 Minimum intended resolution too small, reset to %G.
148 Error reading temporary file
149 Unable to open temporary files
150 CADKEY Entities Created:
151 Entity Name           Model  Coll  Layout  Skip   Ign    Total
152 ==============================================================
153 %-20s %6d %6d %6d %6d %6d %6d
154 IGES Entities Processed:
155 Entity Name                    Num   Ind    Phy    Log  LogPhy  Total
156 =====================================================================
157 %-30s %3d %6d %6d %6d %6d %6d
158 Black
159 Green
160 Red
161 Brown
162 Yellow
163 Cyan
164 Magenta
165 Gray
166 Blue
167 Lt. Blue
168 Lt. Green
169 Lt. Cyan
170 Lt. Red
171 Lt. Magenta
172 Lt. Gray
173 White
174 Author   : %s
175 Company  : %s
176 Contract : %s
177 Part Description :
178 CADKEY Entities Translated:
179 IGES Entities Created:
180 Number of CADKEY entities per Level:
181 Level    Total
182 ==============
183 %5d  %7d
184 Number of IGES entities per Level:
185 Number of CADKEY entities per Color:
186 Color Num       Color Name        Total
187 =======================================
188 %9d    %14s    %9d
189 Non-specifed
190 IGES D:%ld
191 Orphan IGES view D:%ld
192 Delay D:%4ld (%3d:%3d) '%s' 
193 Orphan IGES view D:%ld with no modifications skipped.
194 Orphan IGES view D:%ld ignored as configured.
195 Illegal parameter entry for this entity, Entity type set to 0.
196 Illegal parameter line count for D:%4ld (%3d:%3d) '%s'.
197 Point Dimension's leader does not have 3 segments.
198 Leader(s) missing.
199 Illegal entity in note pointer.
200 Geometry missing.
201 Entity does not conform to IGES Specification.
202 Entity exploded.
203 Illegal entity in geometry pointer.
204 3D IGES spline had form number for 2D spline. Treated as 3D spline.
205 Minimum intended resolution overridden as configured to %G.
206 DT Packet Error
207 Advanced Modeler maximum diameter set to %G
208 Advanced Modeler chord height set to %G
209 Rotation angle (%G) out of range. Value reset to %G
210 2D Parametric Entity not on XY Plane. Forced to XY plane.
211 
212 Force Transformation Matrix to operate ONLY on XY plane.
213 Ignore point on domain curve.
214 Error writing to temporary file
215 Deleting temporary Advanced Modeler entity (%ld).
216 Analysing Associativity Groups ...
217 Updating Advanced Modeler entities ...
218 can't build part filename
219 part file is locked
220 can't access part file
221 part file is read only
222 part file already exists
223 can't create part file
224 no environment space
225 work file open error
226 name file open error
227 work file output error
228 name file output error
229 work file input error
230 name file input error
231 seek error
232 unexpected entity
233 part file open error
234 part file output error
235 IGES dentry stack full
236 IGES dentry stack null
237 Unable to map section area to xhatch. Only boundaries translated.
238 Select START to translate file(s)
239 Finished translating file(s)
240 Loading CADKEY Part File ...
241 Initializing IGES translation ...
242 Reading IGES file ...
243 Writing CADKEY entities ...
244 Writing CADKEY layouts ...
245 Writing CADKEY layout instances ...
246 Deleting temporary CADKEY entities ...
247 Saving CADKEY Part file ...
248   at %s%s, %s%s
249   at %s%s
250 %s %s%s
251 Illegal character encountered in IGES file, replaced with blank.
252 Unsupported Dimension style. Dimension exploded.
253 Unable to translate entity.
254 Converting B-spline at (D:%ld) to point(s)
255 Converting B-spline at (D:%ld) to line
256 Converting B-spline at (D:%ld) to polyline
257 Converting B-spline at (D:%ld) to parametric Spline
258 Converting conic at (D:%ld) to point
259 Converting conic at (D:%ld) to line(s)
260 Converting conic at (D:%ld) to arc
261 Degenerate conic coefficients at (D:%ld).
262 Error
263 Fatal Error