001 Invalid Data... press RETURN 002 Invalid Diameter... press RETURN 003 Invalid Radius... press RETURN 004 Invalid Width... press RETURN 005 Invalid Height... press RETURN 006 Invalid Distance... press RETURN 007 A zero scale factor is not allowed... press RETURN 008 Arc cannot be skewed to view plane... press RETURN 009 Arc cannot be coincident... press RETURN 010 Arc lies on edge... press RETURN 011 Can only TRIM closed curve with DOUBLE option... press RETURN 012 Entity ends = intersection points... press RETURN 013 Intersection points are identical... press RETURN 014 Can only BREAK closed curve with DOUBLE option... press RETURN 015 Break point is not between entity endpoints... press RETURN 016 Cannot make VIEW - points may be co-linear... press RETURN 017 Points are co-linear... press RETURN 018 Intersection not found... press RETURN 019 Lines are parallel... press RETURN 020 Projection line is a point... press RETURN 021 Entities are not at the same depth... press RETURN 022 Entities lie on non-parallel planes... press RETURN 023 Zero length line, switch to screen limit... press RETURN 024 Invalid starting point, helix radius = 0... press RETURN 025 Invalid data, points are coincident... press RETURN 026 Invalid data, entity not created... press RETURN 027 Helix too large, too many splines to create... press RETURN 028 Invalid data for arrow style 1, using default... press RETURN 029 Invalid data for arrow style 2, using default... press RETURN 030 Entities must have common end points... press RETURN 031 Point lies on plane, select another position... press RETURN 032 Points are co-linear... press RETURN 033 Point and line are co-linear... press RETURN 034 Lines are not co-planar or do not intersect... press RETURN 035 Must choose unique lines... press RETURN 036 Spline must be two dimensional... press RETURN 037 Splines may not have more than 75 segments... press RETURN 038 Closed Polylines must have less then 50 points... press RETURN 039 Curves may not have both ends joined... press RETURN 040 Trim not performed, Entity would be too small... press RETURN 041 Entity too small to add to data base... press RETURN 042 Invalid entity combination... press RETURN 043 Solution not found, entity not created... press RETURN 044 Break not performed, Entity would be too small... press RETURN 045 Can not use closed curve... press RETURN 046 Lines are coincident ... press RETURN 047 Entities are not in the same plane ... press RETURN 048 Line lies outside of viewport boundaries ... press RETURN 049 Lines parallel, coincident or not co-planar... press RETURN 050 Disp. and const. views normal, can't use cursor...press RETURN 051 Intersection not on displayed portion of curve... press RETURN 052 Current function can't use construction planes... press RETURN 053 Base curves do not meet at endpoints... press RETURN 054 Must have a fixed plane to display axes... press RETURN 055 View already exists in the database... press RETURN 056 No fixed plane defined, can't save view... press RETURN 057 Too many segments... press RETURN 058 Entity too small or large to add to database...press RETURN 059 Polyline limit has been reached... press RETURN 060 The points may not be on top of each other... press RETURN 061 The points may not be colinear... press RETURN 062 The projection may not be parallel to the plane... press RETURN 063 No collective entities were selected... press RETURN 064 Reference entities may not be collected... press RETURN 065 System views 1 through 8 may not be changed ... press RETURN 066 No user defined or System views to change ... press RETURN 067 Cannot find solution arc with given data ... press RETURN